User Guide

8. Remove two M2x4 silver screws securing the
membrane assembly.
9. Lift out the membrane assembly and SUB LCD.
CD CONTROL/SUB LCD REMOVAL
5. Flip over the membrane cable.
6. Remove three M2x4 black screws securing the
plastic holder.
7. Lift out the plastic holder.
FIELD REPLACEABLE UNIT DOCUMENTATION
5200 Series
Satellite
TM
cPAD AND SUB LCD REMOVAL
1. Remove four M2x4 silver screws securing the cPAD.
2. Remove two M2x4 flat head brass screws securing
the cPAD daughter board.
3. Lift out the cPAD and daughter board.
TOSHIBA
Tough Enough for Today’s World
M2x4 silver screws
M2x4 flat head brass screws
Daughter
board
PAD I/F
CPAD daughter board I/F cable
CPAD
Daughter board
PAD I/F cable
PJ2
PJ3
4. Disconnect the cPAD daughter board I/F cable from
J2 and the PAD I/F cable from J3 on the cPAD
daughter board.
M2x4 black screws
Plastic
holder
M2x4 silver screws
Sub LCD
Membrane assy