User Guide

3-50 100CS
3.23.2 Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
 ↑↓→← : Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTES: 1. The Panel Power On/Off item appears only when the computer is in
Resume mode.
2. The Battery Level item appears only when a battery is installed.
Moving Within the SETUP Menu and Changing Values
1. Press ← and → to move between the two columns. Press ↑ and ↓ to move be-
tween items in a column.
2. Press either the space bar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
MEMORY
BIOS version = x.xx
SYSTEM SETUP
DISPLAY
Display Adapter = VGA compatible
LCD Display Mode = Color
VGA Segment Address= E000H
LCD Display Colors = 222K Colors
Power On Display = Internal/External
Text Mode Stretch = Enabled
Total = 8192 KB
Base = 640 KB
Extended = 7360 KB
Shadow BIOS ROM = 192 KB
Serial Port = COM1(IRQ4/3F8H)
Parallel Port = LPT1 (378H)
I/O PORTS
HARD DISK
HDD Mode = Enhanced IDE (Normal)
HARD DISK
POWER ON PASSWORD
Not Registered
OTHERS
Power-up Mode = Resume
CPU Cache = Enabled
Battery Save Mode = Full Power
Battery Level = E F
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD HDD