User Guide

3-36 100CS
Table 3-4 Error register contents
Bit Name Description
7 BBK1 “0”Other.
(Bad block “1” A bad block mark is detected.
mark)
6 UNC “0”There is no uncorrectable data error.
(Uncorrectable) “1”Uncorrectable data error has been detected.
5 —— Not used.
4 IDNF “0”Other.
(Identification) “1”There was no ID field in the requested sector.
3 —— Not used.
2 ABRT “0” Other.
(Abort) “1”Illegal command error or a drive status error occurs.
1 TK00 “0” The hard disk has found track 0 during a recalibrate command.
(Track 0) “1”The hard disk could not find track 0 during a recalibrate command.
0 —— Not used.