User Guide

100CS 3-33
3.15 Error Code and Error Status Names
Table 3-2 lists the error codes and error status names for the Diagnostic Test.
Table 3-2 Error codes and error status names (1/2)
Device name Error code Error status name
(COMMON) FF Data Compare Error
SYSTEM 01 ROM Checksum Error
Memory 01 Parity Error
02 Protected Mode Not Changed
14 Memory Read/Write Error
DD Cache Memory Error
Keyboard 01 Mouse Interface Error
02 IPS Interface Error
03 Interface Error
04 Retransmit Error
05 Mouse Handler Not Supported
06 PS/2 Mouse & IPS Not connected
FDD 01 Bad Command
02 Address Mark Not Found
03 Write Protected
04 Record Not Found
06 Media Removed
08 DMA Overrun Error
09 DMA Boundary Error
10 CRC Error
20 FDC Error
40 Seek Error
60 FDD Not Drive Error
80 Time Out Error
EE Write Buffer Error
Printer 01 Time Out
08 Fault
10 Select Line
20 Out Of Paper
40 Power Off
80 Busy Line
ASYNC 01 DSR On Time Out
02 CTS On Time Out
04 RX-READY Time Out
08 TX-BUFFER Full Time Out
10 Parity Error