User Guide

3-8 100CS
3.4 System Test
To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter, and
follow the directions displayed on the screen. Move the highlight bar to the subtest you want
to execute and press Enter.
Subtest 01 ROM checksum
The ROM checksum tests the system board from address F0000h to FFFFFh
(64KB).
Subtest 02 Not used
Subtest 03 Not used
Subtest 04 Not used
Subtest 05 Thermistor check
This subtest checks the thermistor that controls CPU temperature. The ther-
mistor cable connects to PJ1 on the system board.