User Guide

100CS 4-13
6. Remove the metal cover .
7. Remove four flat-head M3x4 screws securing the frame to the HDD and separate
the HDD from the frame.
Figure 4-10 Removing the HDD from the frame
Installing the HDD
To install the HDD, follow the steps below and refer to figures 4-9 and 4-10.
1. Secure the frame to the HDD with four flat-head M3x4 screws .
2. Attach the metal cover .
3. Seat the HDD in the computer and press to secure the connection.
4. Secure the HDD frame to the computer with two M2.5x6 screws .
5. Install the optional memory module, optional PC card, and battery pack as de-
scribed in sections 4.4, 4.3, and 4.2.