Owner manual

10
EN
Functional Overview
You can also turn on the unit by pressing these buttons.
1 B ON\STANDBY button
2 Disc tray
3 A OPEN\CLOSE button*
4 Infrared sensor window
5 HDD mode indicator
6 DVD mode indicator
7Display
8 HDMI indicator
9 DV IN jack (AV4)
10 AUDIO input jacks (AV3)
11 VIDEO input jack (AV3)
12 USB input jack
13 I REC button
14 B PLAY button*
15 C STOP button
16 DVD button
17 HDD button
1 ANTENNA IN
2 ANTENNA OUT
3 AUDIO OUT (DIGITAL COAXIAL) jack
4 AUDIO OUT (ANALOG L\R) jacks
5 COMPONENT VIDEO OUTPUT jacks
6 AV2 (DECODER) socket
7 HDMI OUT jack
8 AV1 (TV) socket
9 Mains cable
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
• After turning off the unit, leave the mains cable plugged for about one minute. Otherwise it may cause data loss or the unit may
not work properly.
• This unit does not have an RF modulator.
Front Panel
ON/STANDBY OPEN / CLOSE
HDD STOP PLA Y REC DVD
HDD DVD
1 2 74 8
1314*15 11
10
1617
9
12
3*
5
6
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some operations can be
carried out using the buttons on the front panel.
Rear Panel
1 3 4568 92 7
E2TC2BD_EN.book Page 10 Thursday, May 7, 2009 9:02 AM