E2TE0BD_EN.book Page 1 Friday, March 5, 2010 4:49 PM Introduction OWNER’S MANUAL Basic Setup / TV View Operation RD100KB Connections HDD & DVD VIDEO RECORDER Recording Playback Editing Function Setup EN 1 Others © 2010 Toshiba Corporation For Customer Use: Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference. Model No. __________________________ Serial No.
E2TE0BD_EN.book Page 2 Friday, March 5, 2010 4:49 PM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E2TE0BD_EN.book Page 3 Friday, March 5, 2010 4:49 PM Make your contribution to the environment!!! • Exhausted batteries do not belong in the dustbin. • You can dispose of them at a collection point for exhausted batteries or special waste. • Contact your council for details. Connection to Power BROWN (Live) CORD GRIP OUTER SHEATH OF THE WIRE Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position.
E2TE0BD_EN.book Page 4 Friday, March 5, 2010 4:49 PM Notice for the Progressive Scan Outputs Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 or 576 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output.
E2TE0BD_EN.book Page 5 Friday, March 5, 2010 4:49 PM • • • • • Remote control with 2 R6 (1.5 V) batteries RF cable Owner’s Manual Quick Setup Guide Helpline Sheet The following features are available with this unit.
E2TE0BD_EN.book Page 6 Friday, March 5, 2010 4:49 PM Table of Contents Introduction ...................................................... 2 Editing ............................................................. 57 Precautions ........................................................................ 2 Guide to a Title List .......................................................... 57 Features ............................................................................. 5 Editing Discs ................
E2TE0BD_EN.book Page 7 Friday, March 5, 2010 4:49 PM Introduction Introduction Guide to the Owner’s Manual Symbols Used in the Owner’s Manual Symbol Basic Setup / Basic Setup / Connections Connections TV View Recording Playback Playback Editing Operation TV View Operation Recording To show what recording mode or media type applies to each function, the following symbols appear at the beginning of each operating item.
E2TE0BD_EN.book Page 8 Friday, March 5, 2010 4:49 PM Media for Recording / Playing Media Type DVD-RW DVD-R DVD+RW DVD+R HDD Logo Automatically Format Can be formatted in VR or video mode formatted in video mode Video Mode Icon Maximum Record Time VR DVD-RW DVD-RW 480 min (12 cm) 144 min (8 cm) 480 min (12 cm) 144 min (8 cm) Available Features DVD-R 480 min (12 cm) 144 min (8 cm) 1×-6× Recordable/Playable Ver. 1.1/1.2 Versions Ver. 1.1/1.
E2TE0BD_EN.book Page 9 Friday, March 5, 2010 4:49 PM Introduction Introduction Discs for Playing Disc Type DVD-VIDEO CD-DA Video CD CD-RW CD-R Logo Icon CD VCD CD CD Files for Playing Type of title MP3 JPEG DivX® Icon MP3 JPEG DivX CD-RW/-R USB device CD-RW/-R USB device CD-RW/-R DVD-RW/-R DVD+RW/+R USB device (not guaranteed) Media ® is a trademark of DVD Format/Logo Licensing Corporation. • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc.
E2TE0BD_EN.book Page 10 Friday, March 5, 2010 4:49 PM Functional Overview Front Panel 1*2 3*1 4 2 5 6 7 8 9 10*1 11 17 16 15 14 13 12 You can also turn on the unit by pressing these buttons. Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.
E2TE0BD_EN.book Page 11 Friday, March 5, 2010 4:49 PM 19 20 21 3 22 4 23 24 5 6 25 26 7 27 8 28 9 29 10 11 12* 30 31 13 32 33 34 14 35 36 37 38 Button names described in the Owner’s Manual The instructions in this manual are described mainly with the operations using the remote control. Some operations can be carried out using the buttons on the front panel. Others Others The unit can also be turned on by pressing these buttons.
E2TE0BD_EN.book Page 12 Friday, March 5, 2010 4:49 PM Installing Batteries in the Remote Control Install 2 R6 (1.5 V) batteries (supplied) into the remote control, carefully match with the polarity indicated inside the battery compartment. 1 2 Switching HDD / DVD mode You must select which component you want to operate first. Press [HDD] or [DVD] on the remote control or the front panel.
E2TE0BD_EN.book Page 13 Friday, March 5, 2010 4:49 PM Guide to On-Screen Displays Introduction Introduction Press [DISPLAY] repeatedly while the display menu is displayed to display the following information.
Title name information DISPLAY Menu 4ITLE .</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-14.html>PAGE 14</a></h6><p>E2TE0BD_EN.book Page 14 Friday, March 5, 2010 4:49 PM INFO Menu A General Setting DVB 1 2 3 4 5 6 7 8 9 10 Press [INFO C] while viewing a DVB programme to display the programme information.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-15.html>PAGE 15</a></h6><p>E2TE0BD_EN.book Page 15 Friday, March 5, 2010 4:49 PM G DISC Playback Mode Audio CD / video CD DISC Playback Mode C Title List 1 2 3 To call up the title list.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-16.html>PAGE 16</a></h6><p>E2TE0BD_EN.book Page 16 Friday, March 5, 2010 4:49 PM Front Panel Display Guide 1 2 DTV 3 DB 4 1 DTV indicator : Appears when a disc is in this unit. : Appears when the channel is in digital mode. 2 : : 3 DB : Appears during dubbing. Title / Track and Chapter number 4 Title / track number Chapter number Current status of the unit Appears when playback is paused. Appears during step by step playback. B: Appears when playing back an HDD or disc.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-17.html>PAGE 17</a></h6><p>E2TE0BD_EN.book Page 17 Friday, March 5, 2010 4:49 PM Connect the unit to a TV after considering the capabilities of your existing equipment. Before installation, unplug your TV and this unit Cable Signal Antenna or To Aerial jack RF cable (not supplied) 1 Using the COMPONENT VIDEO OUTPUT Jacks and the AUDIO OUT (ANALOG L\R) Jacks If your TV has component video input jacks, use a component video cable and an audio cable (to connect the AUDIO OUT (ANALOG L\R) jacks).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-18.html>PAGE 18</a></h6><p>E2TE0BD_EN.book Page 18 Friday, March 5, 2010 4:49 PM Using an HDMI Compatible Port [HDMI CONNECTION] • HDMI outputs the video / audio signals without converting to analogue signals. • No audio connections is required. • Use the HDMI cable (commercially available) for connection. • Connect the HDMI output jack of this unit to the HDMI input jack of TV. HDMI cable (not supplied) To HDMI input jack this unit HDMI IN TV Selecting HDMI video resolution Press [HDMI] to select the HDMI video resolution.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-19.html>PAGE 19</a></h6><p>E2TE0BD_EN.book Page 19 Friday, March 5, 2010 4:49 PM This unit has four input terminals. Press [INPUT SELECT F] repeatedly to select the external input mode, then press [PROG. G \ H] repeatedly to select AV1, AV2, AV3 or DV(AV4). Be sure that all the units are switched off before making connections. AV output jack (Scart) Digital Audio for Better Sound Quality Dolby Digital decoder, DTS decoder or MPEG decoder, etc.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-20.html>PAGE 20</a></h6><p>E2TE0BD_EN.book Page 20 Friday, March 5, 2010 4:49 PM Basic Setup / TV View Operation Initial Setting When you turn on this unit for the first time, you need to follow these steps. 1 2 Press [B ON\STANDBY]. 3 Select your desired tuning type according to your area using [K \ L], then press [ENTER\OK]. Turn the TV on. Select the input to which the unit is connected. Also you can customize the memorised channel at “General Setting”. Refer to following pages for details.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-21.html>PAGE 21</a></h6><p>E2TE0BD_EN.book Friday, March 5, 2010 4:49 PM Select “Auto Tuning (DVB & ANALOG)” using [K \ L], then press [ENTER\OK]. The unit will start storing channels available in your area. General Setting Auto Tuning (DVB & ANALOG) DVB Channel Setup ANALOG Channel Setup Wait for several minutes to finish channel storing. 4 Manual Tuning (ANALOG) ANALOG You can preset an analogue channel manually and individually. 1 In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-22.html>PAGE 22</a></h6><p>E2TE0BD_EN.book Page 22 Friday, March 5, 2010 4:49 PM The tuner scans and memorises all the active DVB channels (TV / Radio) in your area. Skip a Preset Channel ANALOG Channel Search S.No. TV Channel You can set the unit to skip channels. You can no longer receive or watch when you access channels using [PROG. G \ H]. 1 Follow steps 1 to 4 in “Manual Tuning (ANALOG)” on page 21. 2 3 Select “Position” using [K \ L], then press [1].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-23.html>PAGE 23</a></h6><p>E2TE0BD_EN.book Page 23 Friday, March 5, 2010 4:49 PM TV View Operation DVB The following operations are available while viewing TV channels through this unit’s tuner. 1 Select a Channel • “Quick Select” menu will appear. ANALOG To switch DVB, analogue and external input (AV1/AV2/AV3/ DV(AV4)) mode. Quick Select Group: All S.No. 2 3 4 13 19 28 29 Press [INPUT SELECT F] repeatedly to select DVB, analogue or external input mode.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-24.html>PAGE 24</a></h6><p>E2TE0BD_EN.book Page 24 Friday, March 5, 2010 4:49 PM Edit Channels Edit Group Lists DVB DVB With “Edit Channels” menu, you can sort all the memorised DVB channels into the group lists (“Quick Select”) or set the viewer limitation (“Adult Lock”), etc. 1 2 In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. Select “Channel” using [K \ L], then press [ENTER\OK]. 3 Select “DVB Channel Setup” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-25.html>PAGE 25</a></h6><p>E2TE0BD_EN.book Page 25 Friday, March 5, 2010 4:49 PM Channel Move DVB DVB You can set the unit to limit the access to the DVB channels. 1 Select the DVB channel you want to limit the access using [K \ L], then press [YELLOW]. Edit Channels S.No. Channel Name 5 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 2 Select the DVB channel you want to change the position using [K \ L], then press [ENTER\OK]. Pop up window will appear. Fav. Skip Lock Del.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-26.html>PAGE 26</a></h6><p>E2TE0BD_EN.book Page 26 Friday, March 5, 2010 4:49 PM Signal Information Multi Audio DVB DVB You can check the detailed information of the current DVB channel. 1 2 Follow steps 1 to 3 in “Auto Tuning (DVB)” on page 22. Many DVB channels transmit Multi Audio information along with their DVB channels. You can select the desired audio mode and audio language. 1 Select “Signal Information” using [K \ L], then press [ENTER\OK]. While viewing a DVB programme, press [AUDIO D].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-27.html>PAGE 27</a></h6><p>E2TE0BD_EN.book Page 27 Friday, March 5, 2010 4:49 PM • If the programme is changed, the subtitle language will be switched back to the default language you set in the “DVB Setting”. Refer to “B Language” on page 72. If the default subtitle language is not available on the new programme, no subtitle will be displayed. 1 2 DVB 1 While viewing a DVB programme, press [AD].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-28.html>PAGE 28</a></h6><p>E2TE0BD_EN.book Page 28 Friday, March 5, 2010 4:49 PM Recording Restrictions on Recording Information on DVD Recording Type of Discs This unit can record on DVD-RW/-R discs and DVD+RW/+R discs. DVD-R/+R discs allow you to record programmes only once, and the recorded contents can be erased although the space left on the disc does not change. DVD-RW/+RW discs allow you to record programmes repeatedly, and the recorded contents can be erased.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-29.html>PAGE 29</a></h6><p>E2TE0BD_EN.book Page 29 Friday, March 5, 2010 4:49 PM Introduction Introduction Making Discs Playable in Other DVD Players (Finalise) After recording, you must finalise the disc to play it back in other players. (See page 43.) You cannot finalise discs in other DVD recorders. Disc Type DVD-R DVD-RW Video Mode VR Mode DVD+RW DVD+R ✔ ✔ After finalising ✔ Undo finalising (See page 43.) Additional recording or editing (See page 43.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-30.html>PAGE 30</a></h6><p>E2TE0BD_EN.book Page 30 Friday, March 5, 2010 4:49 PM Make Recording Compatible Formatting a Disc Choosing the Recording Format of a Blank DVD-RW Disc Video VR DVD-RW DVD-RW When inserting a brand-new DVD-RW/+RW disc, the unit automatically starts to initialise the disc. DVD+RW disc will always be formatted in +VR mode, and DVD-RW disc will be formatted either video or VR mode according to the recording format mode setting of the unit.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-31.html>PAGE 31</a></h6><p>E2TE0BD_EN.book Page 31 Friday, March 5, 2010 4:49 PM HDD Video VR DVD-RW DVD-RW 2 !RE YOU SURE 9ES .O Select “Recording” using [K \ L], then press [ENTER\OK]. Select “Auto Chapter” using [K \ L], then press [ENTER\OK]. 4 If you want to set “Auto Chapter” off, select “OFF” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-32.html>PAGE 32</a></h6><p>E2TE0BD_EN.book Page 32 Friday, March 5, 2010 4:49 PM Setting Bilingual Recording Audio Video DVD-RW DVD-R DVD+RW DVD+R You can select either “Main” or “Sub” audio to record a bilingual broadcast in video mode or +VR mode. This setting is only for recording analogue channel. 1 In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. 2 Select “Recording” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-33.html>PAGE 33</a></h6><p>E2TE0BD_EN.book Page 33 Friday, March 5, 2010 4:49 PM 8 Introduction Introduction • When the unit reaches the specified time, it will be turned off automatically. • To change the recording length during One-touch Timer Recording, press [REC I] repeatedly until the desired length appears. • To cancel One-touch Timer Recording within the specified time, press [STOP C]. Timer Recording DVB HDD ANALOG Video VR DVD-RW DVD-RW DVD-R Press [STOP C] to stop the recording.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-34.html>PAGE 34</a></h6><p>E2TE0BD_EN.book Page 34 Friday, March 5, 2010 4:49 PM 5 Select the digital (DVB) / analogue (ATV) mode or external input (AV1/AV2/AV3) using [K \ L], then press [1]. 6 Select the channel number to record using [K \ L], then press [1]. 7 Select the recording media (“HDD” or “DVD”) using [K \ L], then press [1]. 8 Select the recording mode using [K \ L], then press [1]. Refer to “Recording Mode” on page 28. 9 For DVB channel recording: Select “STTL” to “ON” or “OFF” using [K \ L].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-35.html>PAGE 35</a></h6><p>E2TE0BD_EN.book Page 35 Friday, March 5, 2010 4:49 PM • There are some unrecorded parts due to the overlapped timer programmes. • Recording did not start at the start time. In stop mode, press [TIMER PROG.]. E41 Power failure Select the periodical timer recording programme you want to skip using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-36.html>PAGE 36</a></h6><p>E2TE0BD_EN.book Page 36 Friday, March 5, 2010 4:49 PM • As to the timer recording in progress (which is shown in red in the timer programme list), you only can edit the end time. The changes made during recording will be recognised as only specific to that recording in progress and it will not affect the daily or the weekly recording setting. If the End time of the programme currently being recorded and the Start time of the subsequent programme are same: • If PROG.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-37.html>PAGE 37</a></h6><p>E2TE0BD_EN.book Page 37 Friday, March 5, 2010 4:49 PM HDD Video VR DVD-RW DVD-RW DVD-R 1 While viewing a DVB programme, press [GUIDE]. • List of DVB programmes will be displayed. 2 3 Select a desired programme using [K \ L \ 0 \ 1], then press [YELLOW]. Satellite Link • Other series of the TV programme and recommended programme related to the TV programme will be displayed in “Series List”.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-38.html>PAGE 38</a></h6><p>E2TE0BD_EN.book 2 Page 38 Friday, March 5, 2010 4:49 PM Press [SAT.LINK]. • “Sat” will appear on the front panel display and the unit goes into the satellite link standby mode. Settings for External Equipment Video Colour System When you record from external equipment, you can set the format Auto, PAL or SECAM. To cancel the satellite link function in the satellite link standby mode: Press [B ON\STANDBY] or [SAT.LINK] to turn on the unit.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-39.html>PAGE 39</a></h6><p>E2TE0BD_EN.book Friday, March 5, 2010 4:49 PM Press [C STOP] on the unit to stop recording. Introduction Introduction 6 Page 39 The following instructions are described with the operations using the remote control of this unit. Note 1 2 • With “Control” highlighted, press [ENTER\OK] to display the available devices to control with the remote control of this unit. Select the device you want to operate using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-40.html>PAGE 40</a></h6><p>E2TE0BD_EN.book Page 40 Friday, March 5, 2010 4:49 PM To stop dubbing: DVC to HDD / DVD Dubbing HDD Video VR DVD-RW DVD-RW DVD-R DVD+RW DVD+R Before recording from DVC, see page 19 for connection instructions. 1) Select “Control” using [K \ L], then press [ENTER\OK]. 2) Select “HDD” / “DVD” using [K \ L] (whichever the recording component you are using), then press [ENTER\OK]. 3) Press [STOP C]. Note Preparing for DV dubbing (DVC to HDD): • Make sure your DVC is in video mode.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-41.html>PAGE 41</a></h6><p>E2TE0BD_EN.book Page 41 Friday, March 5, 2010 4:49 PM 1 HDD 3000 MB Dubbing List Add Delete All Dubbing Start 2 Before Starting Dubbing 1/1 1 2 3 4 5 5 Dubbing direction Dubbing menu Remaining recordable space Dubbing list Current page number / total number of pages Recording Mode for Dubbing “High” This unit is compatible with the high speed dubbing from HDD to DVD or VR mode DVD-RW disc to HDD.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-42.html>PAGE 42</a></h6><p>E2TE0BD_EN.book Page 42 Friday, March 5, 2010 4:49 PM 3 One-Title Dubbing HDD Video VR DVD-RW DVD-RW Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. e.g.) HDD A DVD DVD-R Dubbing DVD+RW DVD+R This function lets you select one specific title from the title list for dubbing. HDD DVD DVD HDD If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first. 1 2 Press [TOP MENU].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-43.html>PAGE 43</a></h6><p>E2TE0BD_EN.book Page 43 Friday, March 5, 2010 4:49 PM Introduction Introduction To move a title: To erase all the titles in the dubbing title list: 1) Select “Delete All” in the dubbing menu using [K \ L], then press [ENTER\OK]. 2) Select “Yes” using [K \ L], then press [ENTER\OK]. Final confirmation message will appear. 3) Select “Yes” using [K \ L], then press [ENTER\OK]. • To go back and forth between dubbing menu and dubbing list, use [0 \ 1].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-44.html>PAGE 44</a></h6><p>E2TE0BD_EN.book Page 44 Friday, March 5, 2010 4:49 PM To cancel finalising (DVD-RW disc only): At step 4, press [STOP C]. Select “Yes” using [K \ L], then press [ENTER\OK]. Finalising is cancelled and the unit switches to stop mode. Do you want to cancel? Yes No Finalising 10% Auto Finalise Video DVD-RW DVD-R DVD+R You can finalise discs automatically when the disc space runs out if you set this in “Setup” menu. 1 In stop mode, press [SETUP].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-45.html>PAGE 45</a></h6><p>E2TE0BD_EN.book Page 45 Friday, March 5, 2010 4:49 PM Introduction Introduction Playback 8 Note for HDD / DVD Playback Note The contents of an HDD / DVD are generally divided into titles. Titles are further subdivided into chapters depend on Auto Chapter setting (See page 31). Stop Rec./Start Rec. Title 1 Stop Rec. Title 2 • For DVD-R (video mode), DVD-RW (video mode) and DVD+R discs that are already finalised, a Title menu will be displayed instead of thumbnails.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-46.html>PAGE 46</a></h6><p>E2TE0BD_EN.book Page 46 Friday, March 5, 2010 4:49 PM Playing Back an Audio CD or a Disc with MP3 / JPEG / DivX® Files CD MP3 JPEG DivX ® 1 Follow steps 1 to 4 in “Playing Back an HDD / DVD-RW / DVD-R / DVD+RW / DVD+R Disc” on page 45. 2 If you want to play back an audio CD or a disc with a single file type (e.g, a disc containing MP3 files only), skip to step 4. If you want to play back a disc with mixed file types, proceed to step 3.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-47.html>PAGE 47</a></h6><p>E2TE0BD_EN.book Page 47 Friday, March 5, 2010 4:49 PM 2 ® You can play back the contents in a USB device. Note for DivX® • DivX® files recorded in USB device are not guaranteed to play back. 3 • The unit cannot play back a USB device at the following condition. - During the operation of the disc tray. - During the disc loading, DVD recording, HDD/DVD/CD playback, editing or dubbing. - While “Title List” or “File List” of disc is displayed.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-48.html>PAGE 48</a></h6><p>E2TE0BD_EN.book Page 48 Friday, March 5, 2010 4:49 PM DivX® VOD DivX ® This unit allows you to play back the files purchased or rented from DivX® Video-On-Demand (VOD) services. The files are available on the Internet. When you purchase or rent DivX® VOD files on the Internet, you will be asked to enter a registration code and a deactivation code. This menu items provide you with the both codes. 1 2 3 4 Press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-49.html>PAGE 49</a></h6><p>E2TE0BD_EN.book Page 49 Friday, March 5, 2010 4:49 PM This player is not authorized to play this video. Please push ‘TOP MENU’. Playing Back Discs Using the Disc Menu DVD-V A DVD contains a disc menu, which lists the contents and enables you to customise playback. The menu may offer choices for subtitle languages, special features, and chapter selection. Usually this information appears automatically when you start playback, but sometimes you need to press [DISC MENU] to display the menu.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-50.html>PAGE 50</a></h6><p>E2TE0BD_EN.book Page 50 Friday, March 5, 2010 4:49 PM Cancelling and Recalling the PBC Function Fast Forward / Fast Reverse HDD VCD DVD+RW (PBC OFF) 1 Insert a video CD. 1 In stop mode, press [SETUP]. 2 Select “DISC Playback Mode” using [K \ L], then press [ENTER\OK]. 3 Select “PBC (Video CD only)” using [K \ L], then press [ENTER\OK]. 4 Select “OFF” using [K \ L], then press [ENTER\OK]. 5 Press [SETUP] to exit.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-51.html>PAGE 51</a></h6><p>E2TE0BD_EN.book Page 51 Friday, March 5, 2010 4:49 PM HDD DVD-V DVD+RW Video VR DVD-RW HDD DVD-R VCD DivX ® DVD+RW During playback, press [PAUSE F]. Press [SKIP H \ G] repeatedly. Each time you press [SKIP G], playback will go forward one frame (or step) at a time with the sound muted. To go backward one frame (or step), press [SKIP H]. VR DVD-RW VCD JPEG DivX DVD+R 2 Select the icon using [0 \ 1] to display the selection menu.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-52.html>PAGE 52</a></h6><p>E2TE0BD_EN.book Page 52 Friday, March 5, 2010 4:49 PM Note Note • To clear a marker, select the marker number you want to clear, then press [CLEAR]. • You can mark up to 6 points. • All markers are erased when you perform the following operations.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-53.html>PAGE 53</a></h6><p>E2TE0BD_EN.book Page 53 Friday, March 5, 2010 4:49 PM Search CD Video VR DVD-RW DVD-RW DVD-R DVD+R Using [SKIP H \ G] buttons 1 During playback, press [SKIP G] to skip the current track and move to the next. The unit moves to the next track one after another. To go back to the previous track, press [SKIP H] twice in quick successions. The unit moves backward one track at a time.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-54.html>PAGE 54</a></h6><p>E2TE0BD_EN.book Page 54 Friday, March 5, 2010 4:49 PM A-B: The A-B point will be played back repeatedly. (HDD, DVD, audio CD, video CD and DivX® only) When pressing [ENTER\OK] while A-B is highlighted, A-B repeat is set. • Press [ENTER\OK] again to decide the starting point (A). • Press [ENTER\OK] after setting point (A) to select the ending point (B).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-55.html>PAGE 55</a></h6><p>E2TE0BD_EN.book Page 55 Friday, March 5, 2010 4:49 PM Introduction Introduction Programme Playback Selecting the Format of Audio and Video VCD CD (PBC OFF) You can programme the disc to play back in your desired order. Follow steps 1 to 2 in “Random Playback” on page 54. 2 Select “Programme Play” using [K \ L], then press [ENTER\OK]. 3 Select the desired track using [K \ L], then press [ENTER\OK] or [1].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-56.html>PAGE 56</a></h6><p>E2TE0BD_EN.book 3 Page 56 Friday, March 5, 2010 4:49 PM Select a desired audio soundtrack or audio channel using [K \ L], then press [ENTER\OK]. With a DVD-video, VR mode DVD-RW, or DivX® files: Audio soundtrack will switch. Example: English J Spanish J French If the title contains both main and sub audio, you can further select L (main), R (sub), L/R (mixed of main and sub). With an audio CD or video CD: The Audio channel will switch.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-57.html>PAGE 57</a></h6><p>E2TE0BD_EN.book Page 57 Friday, March 5, 2010 4:49 PM 1 2 Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [HDD] or [DVD], then press [TOP MENU].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-58.html>PAGE 58</a></h6><p>E2TE0BD_EN.book Page 58 Friday, March 5, 2010 4:49 PM Deleting Titles Editing Discs You will find editing discs is easy. This unit offers convenient edit functions. You can edit the following from a title list. • Assigning a name to a title • Dividing a title • Combining titles • Adding titles to a Playlist • Setting or releasing the title protection • Adding or deleting chapter marks • Deleting titles or parts of titles (Possible editing functions depend on the recording format and editing method.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-59.html>PAGE 59</a></h6><p>E2TE0BD_EN.book Page 59 Friday, March 5, 2010 4:49 PM Deleting Selected Titles To enter the title name, refer to “Guide to Editing Title Names” on this page. ORG HDD Edit Edit Title Name 3 Select the title you want to delete using [K \ L \ 0 \ 1], then press [ENTER\OK]. 6 C c 3 ? 0:00:59 When you finish entering the title name, press [ENTER\OK]. 6 Select “Yes” using [K \ L], then press [ENTER\OK]. The name you edited becomes the title.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-60.html>PAGE 60</a></h6><p>E2TE0BD_EN.book Page 60 Friday, March 5, 2010 4:49 PM Adding or Deleting Chapter Markers Manually Adding or Deleting Chapter Marks at once for Video Mode DVD-RW disc VR HDD DVD-RW Video DVD+RW DVD+R You can add chapter marks to a title. After a title is marked with chapters, you can use the chapter search feature. You can set a chapter mark anywhere you want. If you edit the HDD, press [HDD] first. If you edit a disc, press [DVD] first.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-61.html>PAGE 61</a></h6><p>E2TE0BD_EN.book Page 61 Friday, March 5, 2010 4:49 PM Introduction Introduction Hiding Chapters Dividing a Title VR DVD+RW DVD+R You can hide chapters from the title list. Hidden chapters are skipped during playback. Press [DVD] first. Follow the steps 1 to 3 in “Editing Title Name” on page 59. 2 Select “Hide Chapter” using [K \ L], then press [ENTER\OK]. 3 Use [SKIP H \ G], [PLAY B] and [PAUSE F] to decide the chapter to be hidden.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-62.html>PAGE 62</a></h6><p>E2TE0BD_EN.book Page 62 Friday, March 5, 2010 4:49 PM Combining Titles Note • To delete a title from the Playlist, refer to “Deleting Titles” on page 58. • When the number of the Playlist reaches its maximum (refer to page 29), or when the number of the total chapter marks of the Playlists reaches 999 (only for VR mode DVD-RW), “Add To Playlist” cannot be selected. VR DVD-RW HDD Playlist Playlist You can combine two titles into a single title. If you edit the HDD, press [HDD] first.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-63.html>PAGE 63</a></h6><p>E2TE0BD_EN.book Page 63 Friday, March 5, 2010 4:49 PM Introduction Introduction Deleting Parts of Titles VR HDD DVD-RW You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain as it is. 1 Follow the steps 1 to 3 in “Editing Title Name” on page 59. 2 Select “Scene Delete” using [K \ L], then press [ENTER\OK]. 3 Use [SKIP H \ G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the start point, then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-64.html>PAGE 64</a></h6><p>E2TE0BD_EN.book Page 64 Friday, March 5, 2010 4:49 PM Function Setup The following table is the contents which you can set and the default settings. Refer to the following table for useful operation.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-65.html>PAGE 65</a></h6><p>E2TE0BD_EN.book Friday, March 5, 2010 4:49 PM Items (highlight is the default) Auto Chapter E Page 31 Make Recording Compatible E Page 30 Bilingual Recording Audio E Page 32 External Input Audio E Page 31 Video Colour System E Page 38 Contents Insert chapter marks periodically. OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes PCM Dolby Digital ON OFF Set the recording audio type. (Only when the recording mode is set to “XP”.) Set the unit to finalise the disc automatically.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-66.html>PAGE 66</a></h6><p>E2TE0BD_EN.book Page 66 General Setting Setup HDMI Friday, March 5, 2010 4:49 PM Items (highlight is the default) Format E Page 71 HDMI Audio E Page 71 RGB Range E Page 71 HDMI CEC E Page 71 DVB Setting Adult Lock E Page 72 Language E Page 72 Audio Subtitle Data Service Contents Set the colour space for the HDMI output. RGB YCbCr ON OFF Normal Enhanced ON OFF Set whether to output the HDMI audio signal or not. Set the black-white contrast level for HDMI RGB output.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-67.html>PAGE 67</a></h6><p>E2TE0BD_EN.book Page 67 Friday, March 5, 2010 4:49 PM Setup A General Setting A Playback Introduction Introduction Playback A password is already set 1 Enter the current password using [the Number buttons]. Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip/Replay TV System Password Input 2-A Select “No” using [K \ L], then press [ENTER\OK].</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-68.html>PAGE 68</a></h6><p>E2TE0BD_EN.book Page 68 Friday, March 5, 2010 4:49 PM PCM sampling (Default: 48kHz) PCM 48kHz 96kHz C Disc Menu Language (Default: English) (DVD only) Set “Disc Menu Language”. Disc Menu Language 48kHz : If your amplifier / decoder is NOT compatible with 96 kHz PCM, select “48kHz”. Sound recorded at 96 kHz is down sampled to 48 kHz. 96kHz : If your amplifier / decoder is compatible with 96 kHz PCM, select “96kHz”. Sound is sampled at 96 kHz.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-69.html>PAGE 69</a></h6><p>E2TE0BD_EN.book Page 69 Friday, March 5, 2010 4:49 PM Still Mode Auto Field Frame : Automatically select the best resolution setting (“Frame” or “Field”) based on the data characteristics of the pictures. Field : Select “Field” when the pictures are still unstable even if “Auto” is selected. “Field” stabilises the pictures, although the picture quality may become coarse due to the limited amount of data. Frame : Select “Frame” to display relatively motionless pictures in higher resolution.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-70.html>PAGE 70</a></h6><p>E2TE0BD_EN.book Page 70 Friday, March 5, 2010 4:49 PM 3 Select “Yes” using [K \ L], then press Video [ENTER\OK] within 15 seconds. Setup A General Setting A Video Confirm again to use progressive scan. If picture is good, select “Yes”. A TV Aspect B Video Out A TV Aspect (Default: 16:9 Wide) Use this feature to adjust the aspect ratio of the video source which is different from your TV’s ratio to fit your TV monitor without distorting the picture.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-71.html>PAGE 71</a></h6><p>E2TE0BD_EN.book Page 71 Friday, March 5, 2010 4:49 PM Auto Clock Setting 1 Select “ON” using [K \ L], then press HDMI Setup A General Setting A HDMI • Make sure that the HDMI cable is connected and the TV input is set to HDMI. A B C D Format HDMI Audio RGB Ran ge HDMI CEC [ENTER\OK]. 2 Press [SETUP] to exit. 3 Press [B ON\STANDBY] to turn the unit off. • The Auto clock function is activated. • This unit will search for the time every time when the power is turned off.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-72.html>PAGE 72</a></h6><p>E2TE0BD_EN.book Page 72 Friday, March 5, 2010 4:49 PM System information Power off: When you turn the TV off, this unit and all equipment connected via an HDMI cable will automatically be turned off except during recording on the unit. Receiving operational signal from TV’s remote control: You can operate this unit with TV’s remote control. Check your TV owner’s manual for details. Note • This function may not work properly depending on the connected TV.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-73.html>PAGE 73</a></h6><p>E2TE0BD_EN.book Page 73 Friday, March 5, 2010 4:49 PM Introduction Introduction Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Remedy The unit turns on automatically without any operation. • The unit turns on automatically 2 seconds before the timer recording. The unit does not function.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-74.html>PAGE 74</a></h6><p>E2TE0BD_EN.book Page 74 Friday, March 5, 2010 Symptom Remedy TV channels cannot be changed. CHANNEL 4:49 PM • Check if the connections are made securely and correctly. • Check if the cables are damaged. • Try “Channel” setting by following the steps on pages 20-22. Some settings are lost even though you • If you unplug the AC mains cable while the warning message, “Saving settings. followed the procedure correctly. Please wait.”, is displayed, some settings may be lost.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-75.html>PAGE 75</a></h6><p>E2TE0BD_EN.book Page 75 Friday, March 5, 2010 4:49 PM Remedy • • • • HDD/DVD Playback does not start from the beginning. • Resume function may be activated. Refer to page 50 to cancel the resume point. HDD HDD playback suddenly stops. • When DVD recording finishes during HDD playback, the unit will stop the HDD playback, and start writing data to the DVD. This is not a malfunction. Playback cannot be performed. • Check if the playable disc is inserted.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-76.html>PAGE 76</a></h6><p>DVD EDITING HDD / DVD E2TE0BD_EN.book Page 76 Friday, March 5, 2010 Symptom Remedy Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by following the steps on page 61 for title protection and page 43 for disc protection. Dubbing cannot be executed. • When the number of the titles or the chapters exceeds the maximum recordable number, the dubbing will not be executed. Titles cannot be edited or deleted.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-77.html>PAGE 77</a></h6><p>E2TE0BD_EN.book Page 77 Friday, March 5, 2010 Cause Introduction Introduction Error message 4:49 PM Solution • You are trying to record onto the • Delete unnecessary original titles. DVD-RW/-R disc on which the number of (See page 58.) recorded titles has reached the maximum (99). Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) • You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999).</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-78.html>PAGE 78</a></h6><p>E2TE0BD_EN.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-79.html>PAGE 79</a></h6><p>E2TE0BD_EN.book Page 79 Friday, March 5, 2010 4:49 PM Introduction Introduction Specifications General HDD Internal 3.5 inch HDD 320 GB Power requirements 220–240 V Power consumption 35 W ± 10 %, 50 Hz ± 0.5 % 0.74 W Weight 3.</p></li><li><h6><a class="text-decoration-none text-link fw-bold" href=/manual/toshiba/rd100/manual-english/page-80.html>PAGE 80</a></h6><p>E2TE0BD_EN.</p></li></ul></nav></div></section></section></main><footer class=page-footer><div class="container flex-column py-3 py-sm-4"><div class="row mb-1 mb-sm-2 mb-md-5"><a href=/ class="brand offset-sm-0 col-sm-4 col-md-3 col-lg-2 offset-2 col-8 text-center text-md-start"><img class=logo-small src=/assets/img/brand-large.png alt=Manualshelf></a></div><div class=row><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Who We Are</dt><dd><a class=text-decoration-none href=/about>About Us</a></dd><dd><a class=text-decoration-none href=/company>Company</a></dd><dd><a class=text-decoration-none href=/careers>Careers</a></dd><dd><a class=text-decoration-none href=/terms>Terms & Privacy</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Resources</dt><dd><a class=text-decoration-none href=/brands>List of Manufacturers</a></dd><dd><a href=/ class=text-decoration-none>Support</a></dd><dd><a class=text-decoration-none href=/press>For the Press</a></dd><dd><a class=text-decoration-none href=/press#assets>Media assets</a></dd><dd><a class=text-decoration-none href=/faq>FAQ</a></dd></dl><dl class="text-center text-sm-start col-sm-3"><dt class=fw-bold>Get in touch</dt><dd><a class=text-decoration-none href=#>Blog</a></dd><dd><a class=text-decoration-none href=#>Email</a></dd><dd><a class=text-decoration-none href=/dmca>DMCA</a></dd></dl></div><div class=row><div class="text-center text-sm-start col-sm-4 pe-sm-0"><a href=https://www.facebook.com/pages/ManualShelf/1488826334681423 class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-facebook-f"></i></a><a href=https://www.twitter.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-twitter"></i></a><a href=https://plus.google.com/+ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none me-2"><i class="fab fa-google-plus-g"></i></a><a href=http://www.pinterest.com/ManualShelf class="fs-5 text-center d-inline-block social rounded-2 align-middle text-decoration-none"><i class="fab fa-pinterest-p"></i></a></div><div class="col col-sm-8 d-flex flex-column align-items-center flex-sm-row flex-wrap flex-sm-nowrap justify-content-center justify-content-sm-end"><div class="copy w-auto d-flex align-items-center justify-content-center justify-content-sm-end mt-2 mt-sm-0 me-2">ManualShelf © 2013-2025</div><select class="form-select form-select-sm w-auto mt-2 mt-sm-0"><option value=usa>USA</option></select><div></div></div><div id=pixel><script>
googletag.cmd.push(function() { googletag.display('pixel'); });
</script></div></footer><script src=/assets/js/jquery-3.3.1.min.js></script><script src=/assets/js/bootstrap.bundle.min.js></script><script src=/assets/js/jquery.autocomplete.min.js></script><script type=text/javascript>
$.extend({
redirectPost: function(location, args) {
var form = '';
$.each(args, function(key, value) {
form += '<input type="hidden" name="' + key + '" value="' + value + '">';
});
form = '<form id="s1" action="' + location + '" method="POST">' + form + '</form>';
$(document.body).append(form);
$("#s1").submit();
}
});
$(document).ready(function(){
$("#query").autocomplete({
minChars: 3,
groupBy: 'type',
paramName: 'q',
dataType: 'json',
serviceUrl: '/autocomplete',
noCache: true,
showNoSuggestionNotice: true,
noSuggestionNotice: 'Zarro results found',
onSelect: function (suggestion) {
$.redirectPost(suggestion.data.url, {highlight: encodeURIComponent(JSON.stringify(suggestion.data.hls))});
}
});
var toc = $('.toc-selector');
if (toc.length) {
var slideParams = { duration: 800, easing: 'linear' };
toc.click(function() {
$(this).toggleClass('open');
var section = $('.toc-content');
var isCollapsed = section.attr('data-collapsed') === 'true';
if (isCollapsed) {
section.slideDown(slideParams)
section.attr('data-collapsed', 'false')
} else {
section.slideUp(slideParams);
section.attr('data-collapsed', 'true')
}
});
}
});
var lastSmall = $(window).width() < 576;
$(window).resize(function() {
var newSmall = $(window).width() < 576;
if (lastSmall != newSmall) {
lastSmall = newSmall;
window.location.href = window.location.href;
}
});
</script></body></html>
