Manual

Basic setup

F: Remotecontrol settings(Continued)

peratingthesecondandthirdTOSHIBAHDD/DVDvideorecorderswiththeremotecontrolofthisrecorder

Switches the codes to operate the recorder.

If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each

recorder to avoid confusion in the response of the recorders.

Example: Setting this recorder's remote control mode to DR 2, after another HDD/DVD recorder has been

set to DR 1.

(It is necessary to set the rernote control mode on both the recorder and the remote control.)

Start

Setting up the recorder

Press SETUP.

The setting menu appears.

SETUP

Press </_ to select "Operational settings",then press ENTER.

_i+:_++ii_iiiiiiiilyy_i+_'I

e,g,

off

Press • / • to select "IR code", then press

ENTER.

e,g,

Press • / • to select "DR 2" (example), then

press ENTER.

The submenu disappears.

Press ENTER button and the IR code you selected is

activated. Operation may not be possible temporarily until

you set the corresponding mode of the remote control.

Proceed to the next setting.

RD=XS35SU/SC Inst E p48=56 50 + 06.2.13, 4:34 PM