User guide

User’s Manual 7-9
HW Setup
Front Operation Panel
The configuration of the computer’s front panel is controlled through the
following settings shown on the first page of the setup screen.
Front Operation Panel
This setting activates and deactivates the Front Operation Panel.
Beep Volume
With this setting, when the button is pushed, the beep volume changes.
LED Mode
With this setting, when the button is pushed, the indicator lighting method
will change.
Front Operation
Panel
Enabled.
Front Operation
Panel
Disabled (Default).
Beep Volume Off.
Beep Volume Low.
Beep Volume Medium (Default).
Beep Volume High.
LED Mode Mode1
All Off Mode: Normally off, will light up at set
intervals when the button is pushed.
LED Mode Mode2 (Default)
All lit Mode: Normally on, will go off at set
intervals when the button is pushed.