User Guide

4.28 LCD harness 4 Replacement Procedures
4.28 LCD harness
Removing the LCD harness
The following describes the procedure for removing LCD harness (See Figure 4-56).
1. Remove the LCD cushion from the LCD support.
2. Remove the following screws securing the LCD support (display cover side) and
remove the LCD support.
• M2.5×6.0 PSP TIGHT screw x2
3. Remove the following screw securing the LCD harness holder (display cover side)
and remove the LCD harness holder.
• M2.5×4.0B FLAT BIND screw x1
M2.5x6.0 PSP TIGHT
M2.5x6.0 PSP TIGHT
LCD harness holder
LCD cushion
LCD suppor
t
M2.5x4.0B FLAT BIND
Figure 4-56 Removing the LCD harness holder (display cover side)
4-78 QOSMIO G10 Maintenance Manual (960-497)