User Guide

4 Replacement Procedures 4.27 LCD unit / FL inverter
7. Remove the following screws securing the LCD unit.
• M2.0x5.0C SUPER THIN HEAD screw x6
8. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the copper tape, disconnect the LCD harness from
the connector on the back of the LCD.
9. Remove the LCD unit.
M2.0x5.0C SUPER THIN HEAD
Copper tape
LCD unit
M2.0x5.0C SUPER THIN HEAD
LCD harness
Figure 4-54 Removing the LCD unit
QOSMIO G10 Maintenance Manual (960-497) 4-75