User Guide

4.27 LCD unit / FL inverter 4 Replacement Procedures
2. Remove the following screw securing the FL inverter.
• M2.0x5.0C SUPER THIN HEAD screw x1
3. Pull out one insulator and peel off the other one adhered to the FL inverter.
4. Disconnect the LCD harnesses from the connectors CN1 and CN2 on the FL
inverter.
5. Disconnect the HV harnesses from the connectors CN3 and CN4 on the FL inverter.
6. Remove the FL inverter while peeling off the double-sided tape.
M2.0x5.0C
SUPER THIN HEAD
FL inverte
r
Insulator
CN2
CN1
LCD harness
HV harness
Double-sided tape
CN3
CN4
Insulator (adhered)
Figure 4-53 Removing the FL inverter
4-74 QOSMIO G10 Maintenance Manual (960-497)