User Guide

4.25 TV tuner module 4 Replacement Procedures
6. Disconnect the TV antenna cable from the connector on the TV tuner module.
7. Disconnect the TV tuner harness from the connector on the TV tuner module.
8. Open the left and right latches holding the TV tuner module and remove the TV
tuner module from the connector CN2220 on the system board.
TV tuner harness
TV antenna cable
TV tuner coaxial cable
Latch
CN2200
TV tuner module
Figure 4-49 Removing the TV tuner module
4-70 QOSMIO G10 Maintenance Manual (960-497)