User Guide

4.24 VGA heat sink 4 Replacement Procedures
4.24 VGA heat sink
Removing the VGA heat sink
The following describes the procedure for removing the VGA heat sink (See Figure 4-47).
1. Remove the following screws securing the VGA heat sink.
• M2.0×3.0C SUPER THIN HEAD screw x3
2. Pull up the VGA heat sink straight and remove it.
M2.0x3.0C
SUPER THIN HEAD
VGA Heat sink
Figure 4-47 Removing the VGA heat sink
Installing the VGA heat sink
The following describes the procedure for installing the VGA heat sink (See Figure 4-47).
1. Install the VGA heat sink.
NOTE: For details on applying the silicon grease, refer to Installing the CPU.
2. Secure the VGA heat sink with the following screws.
• M2.0×3.0C SUPER THIN HEAD screw x3
4-68 QOSMIO G10 Maintenance Manual (960-497)