User Guide

4.22 Speaker (L) 4 Replacement Procedures
4.22 Speaker (L)
Removing the speaker (L)
The following describes the procedure for removing the speaker (L) (See Figure 4-43).
1. Peeling off the glass tape, pull out the speaker (L) cable from the guide of base
assembly.
2. Pull up the speaker (L) straight and remove it from the slot.
Speaker (L)
Glass tape
Speaker (L) cable
Glass tape
Figure 4-43 Removing the speaker (L)
Installing the speaker (L)
The following describes the procedure for installing the speaker (L) (See Figure 4-43).
1. Install the speaker (L) to the slot of base assembly.
2. Arrange the speaker (L) cable along the guide and fix it with glass tape.
4-64 QOSMIO G10 Maintenance Manual (960-497)