User Guide

4 Replacement Procedures 4.15 Hinge (cover assembly side)
4.15 Hinge (cover assembly side)
Removing the Hinge
The following describes the procedure for removing hinge (See Figure 4-32).
1. Remove the following screws securing the hinges (cover assembly side).
• M2.5×6.0 PSP TIGHT screw x2
2. Turn up the insulator on the left hinge and remove the hinges from the cover
assembly.
M2.5x6.0 PSP TIGHT
Hinge (left side)
Insulator
Hinge
Figure 4-32 Removing the hinge (cover assembly side)
Installing the Hinge
The following describes the procedure for installing the hinge (See Figure 4-32).
1. Install the hinges to the cover assembly and secure them with the following screws.
• M2.5×6.0 PSP TIGHT screw x2
2. Stick the insulator on the left hinge.
QOSMIO G10 Maintenance Manual (960-497) 4-49