User Guide

4 Replacement Procedures 4.12 Bluetooth / LE board
Installing the LE board
The following describes the procedure for installing the LE board (See Figure 4-26).
1. Connect the bluetooth flat cable to the connector CN4400 on the LE board.
2. Connect the LE board flat cable to the connector CN9670 on the LE board.
3. Fitting the wireless communication switch to the lever, install the LE board to the
cover assembly and secure it with the following screws.
• M2.5×4.0B FLAT BIND screw x2
QOSMIO G10 Maintenance Manual (960-497) 4-41