User Guide

4.12 Bluetooth / LE board 4 Replacement Procedures
4.12.2 LE board
Removing the LE board
The following describes the procedure for removing the LE board (See Figure 4-26).
1. Remove the following screws securing the LE board and remove the LE board from
the cover assembly.
• M2.5×4.0B FLAT BIND screw x2
2. Disconnect the LE board flat cable from the connector CN9670 on the LE board.
3. Disconnect the bluetooth flat cable from the connector CN4400 on the LE board.
M2.5x4.0B FLAT BIND
LE board
CN9670
Switch
LE board flat cable
CN4400
bluetooth flat cable
Figure 4-26 Removing the LE board
4-40 QOSMIO G10 Maintenance Manual (960-497)