User Guide

4.10 Display assembly 4 Replacement Procedures
7. Peel off the mask seals from the display mask and remove the following screws
securing the display mask.
• M2.5×6.0B FLAT BIND screw x2
8. Releasing latches of hinge caps, remove the hinge caps from both sides.
9. Remove the following screws securing the hinge.
• M2.5×8.0B FLAT BIND screw x2
(Locktight)
Hinge cap
Hinge cap
Mask seal
M2.5x8.0B FLATBIND
(
Lockti
g
ht
)
M2.5x8.0B FLATBIND
(
Lockti
g
ht
)
Mask seal
M2.5x6.0B
FLAT BIND
M2.5x6.0B
FLAT BIND
Figure 4-18 Removing the hinge caps
4-30 QOSMIO G10 Maintenance Manual (960-497)