User Guide

4.10 Display assembly 4 Replacement Procedures
4
4.10 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-15 to
4-20).
1. Close the display and turn the computer upside down.
2. Remove the following screws from the bottom of the computer.
• M2.5×8.0B FLAT BIND screw x2
(Locktight)
M2.5x8.0B FLAT BIND
(Locktight)
Figure 4-15 Removing the screws (securing display assembly)
4-28 QOSMIO G10 Maintenance Manual (960-497)