User Guide

4.5 Wireless LAN card 4 Replacement Procedures
4.5 Wireless LAN card
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-7).
1. Remove the following screw securing wireless LAN card cover and remove it.
• B2.0 x 4.0Z BIND screw x1
or
• B2.0 x 4.0B LH STICK x1
2. Disconnect the wireless LAN antenna cable Main (white cable) and AUX (black
cable) from the connectors on a wireless LAN card.
3. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector CN2200 on the system board.
Wireless LAN card cover
Latch
B2.0x4.0Z BIND
or
B2.0x4.0B LH STICK
CN2200
Wireless LAN card
MAIN
Wireless LAN antenna
cable (white cable)
Wireless LAN antenna
cable (black cable)
A
UX
Figure 4-7 Removing a wireless LAN card
4-16 QOSMIO G10 Maintenance Manual (960-497)