User Guide

4 Replacement Procedures 4.4 HDD
5. (If a 2nd HDD is installed) Remove the following screw securing the 2nd HDD
assembly.
• M2.5×6.0B FLAT BIND screw x１
6. Disconnect the 2nd HDD assembly from the connector CN1800 on the system board.
M2.5x4.0B FLAT BIND
HDD slot cover
M2.5x6.0B
FLAT BIND
Figure 4-4 Removing the HDD assembly
7. Remove the short pin from the connector pin of the 2nd HDD.
Short
p
in
Figure 4-5 Removing the short pin
QOSMIO G10 Maintenance Manual (960-497) 4-13