User Guide

4.2 Battery pack 4 Replacement Procedures
4.2 Battery pack
Removing the battery pack
The following describes the procedure for removing the battery pack (See Figure 4-1).
CAUTION: Take care not to short circuit the terminals when removing the battery pack.
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery
pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all external devices from the computer.
3. Turn the computer upside down.
4. Release the battery lock.
5. Slide the battery latch to the arrow direction and pull up the battery.
6. Release the hook of the battery cover and remove the battery pack from the battery
cover.
Battery latch
Batter
y
lock
Battery cover
Batter
y
pack
Hook
Figure 4-1 Removing the battery pack
4-8 QOSMIO G10 Maintenance Manual (960-497)