User Guide

3 Tests and Diagnostics 3.31 SETUP

(b) HDD Boot Priority

Use this option to set the booting priority from HDD.

Built in HDD1→Built in HDD2 (Default)

: Searching boot-command from Built in HDD1

Built in HDD2→Built in HDD1

: Searching boot-command from Built in HDD2

NOTE: When 2nd HDD is not installed, this option does not appear in the menu.

If the boot command can not be detected from the prior HDD, booting target

changes to other devices.

Use this option to set the starting method via a network.

PXE Sets to PXE protocol. (Default)

RPL Sets to RPL protocol.

6. Others

Whether or not you need to configure the computer with these options depends

primarily on the kind of software or peripherals you use.

(a) CPU Cache

Use this option to enable or disable the CPU cache.

Enabled Enables the CPU cache. (Default)

Disabled Disables the CPU cache.

(b) Level 2 Cache

Use this option to enable or disable the level 2 cache. When "CPU Cache" is

set to "Disabled", this option cannot be changed.

Enabled Enables the level 2 cache. (Default)

Disabled Disables the level 2 cache.

Use this option to choose a setting from the followings. When the CPU of the

computer is Celeron-M, this option is not displayed.

QOSMIO G10 Maintenance Manual (960-497) 3-97