User Guide

3.20 ONLY ONE TEST 3 Tests and Diagnostics
Subtest 03 GP Button
This subtest checks if the AV buttons (10 buttons) work properly.
The following message appears in the display.
Press button [0]
Press first AV button from the left (the nearest AV button to power button).
The name of AV buttons in the message is described as number (0-9) from the
left side. (Refer to the following picture.)
Power button
A
V buttons
7 8 9
0
4
6
1 2 3 5
Press the indicated AV button [0], then following message will appear in the
display.
Press button [1]
As the same way, press the indicated AV button and carry on the AV button
test.
If wrong key is pressed, following message will appear in the display.
Press any key !
Pressing any key, indication of pressing AV button will appear in the display
again. Unless the right AV button is pressed, this operation is repeated.
After checking all AV buttons, return to the ONLY ONE TEST menu
automatically.
Subtest 04 Kill Switch
This subtest checks if the Wireless communication switch works properly.
If the test is started with the switch ON, following message appears in the
display.
Kill switch is set to a start position (OFF)
3-42 QOSMIO G10 Maintenance Manual (960-497)