User's Manual

19
EN
White Balance
The camcorder adjusts the color balance of images automatically. Three manual white balance
settings are available:
Auto: • The camcorder automatically adjusts white balance.
Daylight: • Under outdoor condition.
Fluorescent: • Under uorescent light condition.
Tungsten: • Under tungsten light condition.
Operation Display Screen
In Movie/Picture Record Mode, press OK Button 1.
to show the wheel menu.
Use Up/Down Buttons to select [White Balance]. 2.
The submenu of White Balance pops up.
Press Right Button to 3. enter the submenu.
Use Up/Down Buttons to select the desired 4.
option.
Press OK Button to validate the setting.5.
Scene
You can select the mode according to the scene condition.
Auto: • Shoot without any special effect on the image.
Skin: • Shoot with an effect that makes skin tones more natural.
Night• : Use Night Mode for night scenes or low light conditions.
Backlight:• You can take shots when the bright light is behind the subject.
B/W:• The image is converted to black-and-white.
Classic: • The image is converted to a sepia look.
Negative: • The image is converted as the negative of the normal.
Operation Display Screen
In Movie/Picture Record Mode, press OK Button 1.
to show the wheel menu.
Use Up/Down Buttons to select [Scene]. The 2.
submenu of Scene pops up.
Press Right Button to 3. enter the submenu.
Use Up/Down Buttons to select the desired 4.
option.
Press OK Button to validate the setting.5.
Note
To avoid blurry pictures, place the camcorder on a at, steady surface, or use a tripod when
taking shots in the Night Mode.