User Guide

TOUCH PAD REMOVAL

1. Carefully peel off the copper tape.

2. Remove four M2x3 silver flat head screws securing

the Touch pad assembly.

3. Lift out the touch pad assembly.

4. Separate the touch pad board from the touch pad

bracket.

FIELD REPLACEABLE UNIT DOCUMENTATION

Portege

TOSHIBA

Tough Enough for Today’s World.

P2000 Series

M2x3 silver flat head screws

copper tape

Touch pad board

Touch pad bracket

1. Remove the RTC/Speaker holder.

2. Remove one M2x4brass screw securing the LCD

latch assembly and lift it out.

3. Disconnect the Touch pad/ Membrane cable from

the touch pad board.

Touc pad/

Membrane

cable

RTC/

Speaker

holder

M2x4 brass screws

LCD latch assy