User Guide

SYSTEM BOARD REMOVAL
4. Remove two M2x4 flat head brass screws securing
the system board.
5. Remove two M2x4 brass screws securing the
PC card slots.
6. Lift out the system board.
7. Disconnect the PC card slots from PJ11 on the system
board.
8. Disconnect the HDD/modem interface cable from PJ3
on the system board.
9. Remove two cool sheets on the top side of the system
board.
SYSTEM BOARD REMOVAL
1. Peel off the glass tapes securing the modem
harness and the LAN harness.
2. Disconnect the LAN harness from PJ352 on the
system board.
3. Disconnect the LCD/FL harness from PJ34 and
PJ35 on the system board.
M2x4 brass
flat head
screws
System board
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
TOSHIBA
Tough Enough for Today’s World.
P2000 Series
Glass tape
LCD/FLharness
PJ34PJ35
LAN
harness
PJ352
M2x4 brass flat head screws
PC card slots
PJ11
HDD/modem interface cable
PJ3
3. Disconnect the sound jack cable from PJ999 on the
sound jack board.
4. Lift out the sound jack board.
Sound jack
cable
PJ999
Sound jack board
SOUND JACK BOARD REMOVAL