User Guide

MODEM BOARD REMOVAL
RTC REMOVAL SPEAKER REMOVAL
1. Disconnect the modem harness from the modem board.
2. Remove two M2x4 brass screws securing the modem
board to the HDD/Modem interface board.
3. Disconnect the modem board from PJ3 on the
HDD/modem board
1. Peel off two strips of glass tape securing the RTC cable.
2. Disconnect the RTC harness from PJ790 and lift it out.
1. Disconnect the speaker harness from PJ10 on
the system board.
2. Lift out the speaker and separate the rubber
holder.
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
TOSHIBA
Tough Enough for Today’s World.
P2000 Series
Glass Tape
RTC harness
PJ790
Speaker
RTC battery
PJ10
Speaker harness
Rubber holder
Modem
harness
Modem
board
HDD/modem
interface
board
M2x4 brass screws
SOUND JACK BOARD REMOVAL
1. Lift up the sound jack board to free it from the
guide pins and pull it out.
2. Turn the board over as shown on the next picture.
Sound jack board
Guide pins