User Guide

TOP COVER REMOVAL
3. Turn the computer right side up and open the display.
4. Disconnect the following cables by carefully lifting the lever
using from the PCB:
- Touch Pad cable from PJ334
- Flexible PWB from PJ9
- Internet/ In-Touch Buttons cable from PJ8
- Power Button/ LED board cable from PJ7
5. Remove six M2x4 brass screws securing the top
cover.
6. Separate the top cover from the bottom cover.
Touch Pad cable
PJ334 PJ9
Flexible
PWB
Internet/In
Touch buttons
cable
PJ8
Power button/ LED board cable
PJ7
M2x4 brass screws
Top cover
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
P2000 Series
TOSHIBA
Tough Enough for Today’s World.
MINI PCI CARD REMOVAL
1. Disconnect the Mini PCI card interface adaptor from the
system board.
2. Carefully lift up the Mini PCI card interface adaptor and
turn it over as shown on the next picture.
3. Disconnect the black and white mini coax from the
Mini PCI wireless LAN card.
4. Spread the mini PCI connector clips and pull the
wireless LAN card out of the connector about
30 degrees.
Mini PCIcard
interface
adaptor
Wireless LAN card
White mini coax
Black mini coax
Mini PCI
connector
clips