Camera Accessories User Manual

■ Camera tampering detection

This option allows the Network Camera to trigger when the camera detects that is is being tampered

with. To enable this function, you need to congure the Tampering Detection option rst. Please refer

to page 104 for detailed information.

■ Manual Trigger

This option allows user to enable event triggers manually by clicking the on/off button on the

homepage. Please congure 1 ~ 3 events before using this function.

3. Action

Dene the actions to be performed by the Network Camera when a trigger

is activated.

■ Trigger digital output for

seconds

Select this option to turn on the external digital output device when a trigger is activated. Specify the

length of the trigger interval in the text box.

■ Backup media if the network is disconnected

Select this option to backup media le on SD card if the network is disconnected. Please note that this

function will only apply after you set up the network storage (NAS). For more information about how to

set up network storage, please refer to page 107.