User Guide

File No. 960-140

3-5

4. Select the option you want to execute and press Enter. The following message

appears:

SYSTEM TEST XXXXXXX xxx DIAGNOSTIC TEST VX.XX

[Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB- TEST : XX

PASS COUNT: XXXXX ERROR COUN T: XXXXX

WRITE DATA: XX READ DATA : XX

ADDRESS : XXXXXX STATUS : XXX

SUB-TEST MENU :

01 - ROM checksum

02 -

03 -

04 -

05 - Thermister check

06 - Quick charge

07 - DMI read

08 - DMI write

99 - Exit to DIAGNOSTIC TEST MENU

NOTE: The menu displayed by your computer may be slightly different from the

one shown above.

5. Select the desired subtest number from the subtest menu and press Enter. The

following message will appear:

TEST LOOP : YES

ERROR STOP : YES

Use the arrow keys to move the cursor to the desired option and press Enter.

Selecting YES for TEST LOOP sets the test to run continuously until halted by the

user. Selecting NO returns the subtest menu to the main menu after the test is

complete.