User Guide

File No. 960-140
1-22
Table 2-3 Printer port LED boot mode status (5/5)
LED Status Test item Message
A0h
Boot password Boot password
C0h
External I/O check External I/O check
A6h
BIOS information update Set font address
Set shadow RAM size
Set expansion memory size to CMOS
System resource update
Set extended memory size to runtime BIOS for
INT15h
ACPI table update
Set SCT area to runtime BIOS
Set battery save mode
Send date to PS microprocessor
Close PCI device configuration area
Protect system BIOS
Cache control
FEh
System ROM check System ROM check
FFh
End
Check 1 If any of the following error codes display, go to Procedure 5.
B0h, B2h, B3h, 00h, 01h, 05h, 06h, 03h, 04h, 02h, 71h, 07h, 73h, 74h, 72h, 76h,
79h, 77h, 78h, 81h, 82h, 7Bh, 7Ch, 7Ah, 08h, 09h, 0Dh, 19h, 1Fh, 20h, 21h, 25h,
30h, 40h, 41h, 42h, 70h, 80h, A0h, C0h, A6h, FEh
Check 2 If error code 83h is displayed, go to the following sections:
Section 2.5. FDD Troubleshooting
Section 2.6. HDD Troubleshooting