User Guide

File No. 960-140
4-22
4.9 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board follow the steps below. (See figures 4-18 to 4-19.)
1. Remove one M2x5 silver screw securing the FL inverter board.
2. Slide the FL inverter board slightly to the right to clear a small latch and lift out the
board, being careful not to apply tension to the cables.
Figure 4-18 Removing the FL inverter board
3. Carefully turn the FL inverter board over and disconnect the display cable from CN1
and the FL cable from CN2.