User Guide

File No. 960-140
4-21
5. Continue along the sides (three latches on each side) and the bottom (three latches).
Figure 4-17 Removing the display mask
Installing the Display Mask
To install the display mask follow the steps below. (See figures 4-16 and 4-17.)
1. Set the display mask in place and fasten the latches starting with the three at the
bottom.
2. Continue along the sides (three latches on each side) and the top (four latches).
3. Mount the AccuPoint cap.
4. Secure the display mask with two M2.5x5 screws.
5. Secure the two mask seals.