User Guide

File No. 960-140
4-18
4.7 System Board, Heat Sink and PC Card Slot
Removing the System Board, Heat Sink and PC Card Slot
To remove the system board, heat sink and PC card slot observe the following procedures.
(See figures 4-13 to 4-15.)
1. Grasp the system board and lift it out.
Figure 4-13 Removing the system board
2. Remove one M2x4 screw and two M2x6 screws securing the heat sink to the system
board.
3. Remove four M2x14 screws securing both the heat sink and PC card slot to the
system board.
4. Lift off the heat sink.