User Guide

File No. 960-140
4-17
4.6 RTC Battery
Removing the RTC Battery
To remove the RTC battery follow the steps below. (See figure 4-12.)
1. Disconnect the RTC battery cable from PJ300 on the system board.
2. Lift out the RTC battery.
Figure 4-12 RTC battery removal
Installing the RTC Battery
To install the RTC battery follow the steps below. (See figure 4-12.)
1. Connect the RTC battery cable to PJ300 on the system board.
2. Seat the RTC battery.
3. Install the removed components.