User Guide

File No. 960-140
4-12
4.4 Keyboard
Removing the Keyboard
To remove the keyboard follow the steps below. (See figure 4-7.)
1. Remove two M2x3 silver screws securing the keyboard straps and slide each strap
out from under its brace.
2. Disconnect the flexible cable from PJ302 and remove the keyboard.
Figure 4-7 Removing the keyboard
Installing the Keyboard
To install the keyboard follow the steps below. (See figure 4-7.)
1. Slide the keyboard straps under slots in the metal plate and secure them with two
M2x3 silver screws.
2. Connect the flexible cable to PJ302.
3. Seat the keyboard. The keyboard has tabs on the front, so install it by inserting the
front first, taking care not to pinch the flexible cable.
4. Secure the keyboard brace.
5. Install removed components.