Automobile Parts User Manual

− 68 −
6 F 8 A 0 9 3 4
Switch operation
Display example
Description
C:RANGE
1 R TYPE
2 R1 3 R2
4 R3 5 R4
6 R HYS
7 EXIT
Pushing returns you to the setting
menu.
● Changing the range type
The range type should be set before changing the span.
The following is an example to change the range type from Single range (SINGLE) to
Bidirectional automatic selection of multiple ranges (2F-2R).
Switch operation
Display example
Description
C:RANGE
1 R TYPE
2 R1 3 R2
4 R3 5 R4
6 R HYS
7 EXIT
Select "R TYPE" from the setting item
selection menu.
STEP1
R TYPE
SINGLE
The currently set range type (SINGLE in
this example) appears.
Then push .
* Pushing returns you to the setting
menu.
STEP2
R TYPE
4F-0R
The switches at the bottom change.
( are shown.)
At the same, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push .
STEP3
R TYPE
2F-2R
You can continue to change the setting item.
Push to change the selection
items.
: Selected item is scrolled up.
: Selected item is scrolled down.
STEP4
R TYPE
2F-2R
Perform this operation to change the setting
to 2F-2R.
When the item is changed to the desired
item, push to set the item
temporarily.
ESC
ESC
ESC
ESC
ESC
ESC