User manual

Introduction
1 1 - 1
1. Introduction
Product Overview
The external print servers enhance company capability by letting you place your printers, plotters, or equality
printers at convenient locations directly on the Ethernet network, and by increasing network printer
performance and management.
Network Management
The print servers support the Simple Network Management Protocol (SNMP), which remote printer
management and a warning. A standard SNMP agent is permanent on these print servers. Any standard
SNMP-based application can be used to access and manage these print servers.
Network configuration
The print servers provide an embedded web server that can be accessed via a prop web browser. We also
subsidiary Windows-based PSAdmin utility which help administrator to setup print server environment, for
example, Netware, Windows 95/98/Me, Windows NT/2000/XP, Mac or Unix system.
Transmission Media
IEEE 802.3
Ethernet
10Base-T Four pairs of unshielded
twisted-pair 3,4 or 5 cable
with RJ-45 connector
IEEE 802.3 Fast
Ethernet
100Base-TX Four pairs of unshielded
twisted-pair 5 cable with
RJ-45 connector for
10/100Mbps
Note: The cable length from the print server to hub/switch
must not exceed 300 feet (Approximately 100
meters)
Components and Features
One Port Print server
․1 Bi-direction parallel port (IEEE 1284)
․Fast Ethernet network port: RJ-45 for 10Base-T or
100Base-TX
․POST (Power On Self Test)
․2 LEDs on backside of indicate status and flow/link lights
․2 setup diskette or 1 CD for Netware, Windows
95/98/Me/NT/2000/XP
․1 external AC power adapter
․1 user’s manual