User manual

Configuration from Embedded Web Server
6 5 - 6
SNMP Status
1. Click Status, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Communities: This option allows you to view SNMP communities from the print server. There are two
communities that control message from the network management of the print server.
SNMP Traps: This option allows you to view SNMP traps from the print server.
AppleTalk Status
1. Click Status, it then appears the sub-menu.
2. Click AppleTalk, it then as shown in the following picture.
Zone Name: If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current
AppleTalk Status of the print server in the web browser.
Chooser Name: <ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the print server’s
Node ID.
Printer Type: This option allows you to view printer type from the print server. If you are using a PostScript
printer you can select the LaserWriter 8 icon from your Mac computer.
Data Format: This option allows you to view data format from the print server. If you are using a PostScript
printer you can select ASCII, TBCP or BCP format from web configuration.