User manual

Configuration from Embedded Web Server
1 5 - 1
5. Configuration from Embedded Web Server
Overview
The Print Server contains an embedded web server that can be accessed through a supported web browser on
a LAN, for example, IE 4.0, Netscape 4.0 or above is recommended.
The embedded web server provides access to configuration and management pages for the print server and
the connected peripheral device.
Using Embedded Web Server
Before you can use the embedded web server, the print server must be configured with an IP address. There
are many ways to configure the print server’s IP address. For example, the Windows-based of PSAdmin utility
can easily set an IP address with the print server, please see the Properties – TCP/IP options of chapter 3.
After an IP address is established on the print server, perform the following step:
Status Menu
Once you have finished the IP address configuration with print server. You should be use web browser to view
and management the print server. The status menu of the print server helps administrator control the print
server’s System, Printer, NetWare, TCP/IP, SNMP and AppleTalk of status for the time being.
Preparation
Enter the IP address of the print server as the URL, for example, 192.168.10.132. Then the print server’s home
page will appear in content of the web browser.
Please follow this information in the status menu of the print server: