Supplementary Manual

31
Adding memory (optional)
5.375 x 8.375 ver 3.1
2 Click Shut Down.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the computer,
including the AC adaptor.
4 Close the display panel and turn the computer upside down.
5 Remove the main battery. For information on removing the
main battery, see “Removing the battery from the computer”
on page 43.
(Sample Illustration) Locating the memory module slot cover
6 Using a small Phillips screwdriver, loosen the captive screws
that secure the memory module slot cover.
(Sample Illustration) Removing the memory module slot cover
7 Remove the memory module slot cover.
8 Place the screws and the cover in a safe place so that you can
retrieve them later.
Memory module
slot cover
Front of computer
Front of computer