Manual

Use Fixed IP Address

To setup a new static IP address:

1. Selectthe Use fixed IP address option.

2. Type a new IP address in the IP addressbox.

3. Type a new address in the Default Gateway box.

4. Click Save to confirm the new setting.

When using static IP address to login to the IP Camera, you can access it either through

Surveillix Device Search software or type the IP address directly in the address bar of your

Internet Explorer.

General

 IP address – The IP Address is necessary for network identification.

 Subnet mask – Used to determine if the destination is in the same subnet. The

default value is 255.255.255.0.

 Default gateway – Used to forward frames to destinations on different subnets or for

internet access.

 Primary DNS – The primary domain name server that translates hostnames into IP

addresses.

 Secondary DNS – A secondary domain name server that backups the primary DNS.

Advanced

 Web Server port – Defines the port that Internet Explorer uses to connect over the

web and view video. If this port is changed then the new port must be defined when

attempting to web connect (ex: if your camera’s IP address is 192.168.0.100 and you

change the web port to 8001, then you must type http://192.168.0.100:8001 in your

browser).

Note This is also the port used in ToshibaServer Software.

 RTSP port– The default RTSP port is 554; setting range: 1024 ~65535.

 MJPEG over HTTP port – The default HTTP Port is 8008; setting range: 1024

~65535.

 HTTPS port – The default HTTPS Port is 443; setting range: 1024 ~65535.

Note No port number can be used in duplication on more than one item.

IPv6 Address Configuration

To enable IPv6 select Enable IPv6 and click Save. See your network administrator if you

are unsure of your network configuration.