Manual

System

Note The System tab is only accessible by the Administrator.

System

Host Name – The Host Name is used to identify the camera on your system. If camera

based Motion Detection is enabled and is set to send alarm message by Mail/FTP, the

host name entered here will display in the alarm message.

Time Zone – Select your time zone.

Enable Daylight Saving Time – Select this option to enable daylight saving time, and

then select the offset, start and end dates and times.

Time Format – Select your desired time format.

Sync With Computer Time – Select to synchronizethe camera date and time with the

connected recorder.

Manual – Set video dateand time manually.

Sync with NTP server – Network Time Protocol (NTP) is an alternate way to synchronize

your camera’s clock with a NTP server. Specify the server you wish to synchronize in the

NTP Server box. Then select an Update Interval. For more information about NTP,

visitwww.ntp.org.