User Manual

Gigaframe (PA3650*)
GB-14 User’s Manual
Additional features (available on PA3650*-1ET2
only)
Built-in battery
On the PA3650*-1ET2 model, the photo frame is equipped with a
built-in lithium polymer battery.
To charge the battery, follow the steps below:
1. Connect one end of the AC power adapter to the power jack on
the back of the photo frame.
2. Connect the other end to a power outlet.
3. Place the photo frame horizontally or vertically on a stable
surface, and then keep the power connected until the battery is
fully charged.
■ When the battery charge is running out of power, a warning
message will appear on the screen. Charge the battery as
described above.
■ The fully charged battery usually lasts about 30 minutes,
depending on your use and settings.
■ Power system and plug types may vary depending on your
country/region.
Do not disassemble or modify the battery.
GMH300037010_WEU.book Page 14 Thursday, April 24, 2008 2:10 AM