F15 Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 254 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Models: Qosmio™ F15 Series ReWritable CD/DVD Drives The computer system you purchased may include a ReWritable CD and/or DVD drive(s), among the most advanced data storage technologies available.
Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can.
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. 3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.
Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Finnish: Dutch: French: Swedish: Danish: German: Valmistaja TOSHIBA Corp. Digital Media Network Company vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Hierbij verklaart TOSHIBA Corp. Digital Media Network Company dat het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp.
Spanish: Portuguese: Por medio de la presente TOSHIBA Corp. Digital Media Network Company declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. TOSHIBA Corp. Digital Media Network Company declara que este Radio LAN device está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. USA – Federal Communications Commission (FCC) This device complies with Part 15 of FCC Rules.
Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4DSOF4 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3.
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ ❖ ❖ Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in your computer.
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
802.
❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Austria Denmark Germany Italy Netherlands Portugal UK Belgium Finland Greece Liechtenstein New Zealand Sweden USA Turbo Mode (5 GHz) Canada USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth™ products with all PCs and/ or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.
community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
Caution: FCC Interference Statement This device complies with part15 of the FCC rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference, and ❖ This device must accept any interference received, including interference that may cause undesired operation. Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the authorization to operate this equipment.
Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4FH1 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3.
DVD-ROM, multi-function drive safety instructions The DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Export Administration Regulation This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited. Notice The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.
Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc. Secure Digital and SD are trademarks. xD-Picture Card is a trademark of Fuji. MultiMediaCard is a trademark of Infineon Technologies AG. All other brand and product names are trademarks or registered trademarks of their respective companies. Computer disposal information This product contains mercury.
Contents Introduction................................................................................ 37 This guide ...............................................................38 Safety icons ............................................................39 Other icons used...............................................40 Other documentation ..............................................40 Service options .......................................................41 Chapter 1: Getting Started..................
Contents 29 Using the computer for the first time ......................56 Opening the display panel .................................56 Your computer’s features and specifications ....57 Turning on the power .......................................57 Using the TouchPad™.............................................59 Scrolling with the TouchPad™ ..........................59 Using the Scroll button .....................................60 Using the Control buttons .................................
Contents keyboard .....................................................87 Ctrl, Fn, and Alt keys .........................................88 Function keys....................................................88 Windows ® special keys.....................................89 Overlay keys .....................................................89 Using the overlay to type numeric data.............90 Starting a program..................................................91 Starting a program from the Start menu....
Contents 31 Chapter 3: Mobile Computing................................................ 118 Toshiba’s energy-saver design..............................118 Running the computer on battery power ..............119 Battery Notice .................................................119 Power management ........................................120 Using additional batteries ...............................121 Charging the batteries...........................................121 Charging the main battery..............
Contents The World Wide Web .....................................148 Internet Service Providers...............................148 Connecting to the Internet .............................149 Surfing the Internet.........................................149 Internet features..............................................150 Uploading and downloading files from the Internet ..............................................150 Exploring audio features .......................................151 Recording sounds.
Contents 33 On systems with QosmioPlayer currently installed ....................................................173 On systems with QosmioPlayer previously uninstalled using the Windows® “Add/Remove Programs” ................................................174 Chapter 5: Getting to Know the Windows ® XP Media Center Edition 2005.......................................................... 176 Media Center Setup...............................................177 Connecting to a Television ...................
Contents Finding Music Files in My Music .....................212 Playing a Song ................................................213 Setting Up an Automatic Disc Jockey .............214 Finding and Playing an Album.........................214 Creating a Playlist ...........................................215 Displaying Your Pictures.......................................216 Viewing a Slide Show......................................218 Sorting your Pictures ......................................
Contents 35 Mouse utility ................................................245 Hotkey utility ..................................................245 Toshiba Hardware Settings .............................246 Toshiba Picture Enhancement Utility ..............247 CD/DVD Drive Acoustic Silencer .....................248 Setting passwords ................................................249 Using an instant password..............................250 Using a supervisor or user password .............
Contents Contacting Toshiba .........................................280 Other Toshiba Internet Web sites .........................281 Toshiba’s worldwide offices..................................281 Appendix A: Hot Keys............................................................. 283 Volume Mute ........................................................283 Instant password security.....................................284 Power usage profile .......................................284 Stand By mode .....
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. Qosmio™ F15 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location. You will find your operating system, Microsoft® Windows® XP Media Center Edition (MCE), already installed on your computer.
Introduction This guide NOTE The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba's Web site at pcsupport.toshiba.com.
Introduction Safety icons 39 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Other documentation Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text. Other documentation Your computer comes with the following documentation: ❖ This electronic user’s guide.
Introduction Service options 41 Service options Toshiba offers a full line of optional service programs to complement its limited warranty. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 254. 5.375 x 8.375 ver 2.
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations. This section provides guidelines for setting up your computing environment.
Getting Started Selecting a place to work 43 To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight. ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than the speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ❖ Extreme heat, cold, or humidity.
Getting Started Selecting a place to work This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive-strain injury, and repetitive-stress syndrome. Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer. ❖ Place the computer on a flat surface at a comfortable height and distance.
Getting Started Selecting a place to work ❖ 45 Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor. If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs.
Getting Started Selecting a place to work Arms and wrists ❖ Avoid bending, arching, or twisting your wrists. Keep them in a relaxed, neutral position while typing. ❖ Exercise your hands, wrists and arms to improve circulation. Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency.
Getting Started Selecting a place to work ❖ 47 Avoid prolonged physical contact with the underside of the computer. If the computer is used for long periods, its case can become very warm. While the temperature may not feel too hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury. Some PC Cards can become hot with prolonged use.
Getting Started Selecting a place to work Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files. ❖ Scan all new files for viruses. This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You will need a special program to check for viruses. Ask your dealer to help you.
Getting Started Setting up your computer 49 Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 49 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards. Your computer comes with a rechargeable battery pack that must be charged before you can use it. To use external power or to charge the battery, you must attach the AC adapter.
Getting Started Setting up your computer 8 51 Enter your name and click Next to complete the process. A window displays the message, “Thank you.” 9 Click Finish to continue. Your computer restarts automatically. Registering your computer with Toshiba Product registration is strongly recommended and allows Toshiba to send Customer periodic updates, announcements, and special offers applicable to the product. Product registration can be completed during the initial start up process of your computer.
Getting Started Connecting to a power source ❖ Connect a digital or plasma TV (see “Connecting a digital or plasma television or VCR/DVD player” on page 76) ❖ Connecting a standard TV antenna (see “Connecting a standard television, projector, or VCR/DVD player” on page 77). ❖ Install PC Cards (see “Inserting and removing PC Cards” on page 154) Connecting to a power source Your computer requires power to operate.
Getting Started Connecting to a power source 53 When you connect the AC adapter to the computer, always follow the steps in the exact order as described in the User’s Manual. Connecting the power cord/cable to a live electrical outlet should be the last step; otherwise, the adapter DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched. As a general safety precaution, avoid touching any metal parts.
Getting Started Connecting to a power source Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. _ + 2 Plug the AC adapter cord into the DC-IN on the back of the computer. Sample connecting the AC adapter to the computer 3 Connect the power cord/cable to a live electrical outlet. Damaged power cord/cables can cause fire or electric shock.
Getting Started Charging the main battery If the main battery is present, the battery light ❖ Amber while the battery is charging ❖ Green when the battery is fully charged 55 glows: If the battery light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving input from the AC power supply. Disconnect the AC cable and remove the battery pack. See “If Something Goes Wrong” on page 254 for troubleshooting information.
Getting Started Using the computer for the first time
Getting Started Using the computer for the first time NOTE 57 Over a period of time, and depending on the usage of the computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen.
Getting Started Using the computer for the first time 3 Press and hold the power button until the on/off light on the system indicator panel glows green—approximately one second. An indicator light on the front of your computer lets you know the system indicator status when the display is closed. NOTE When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Getting Started Using the TouchPad™ 59 Using the TouchPad™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: ❖ To move the cursor to the top of the page, push your finger forward on the TouchPad. ❖ To move the cursor to the bottom of the page, drag your finger toward you.
Getting Started Using the TouchPad™ Using the Scroll button For applicable systems, the scroll button, located between the primary and secondary control buttons on the TouchPad, is used for rapid viewing of pages on the screen. Using the Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession.
Getting Started Using the TouchPad™ 61 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. NOTE The Fn + F9 shortcut can be used to disable or enable the TouchPad (see “Disabling or enabling the TouchPad” on page 289). 5.375 x 8.375 ver 2.
Getting Started Installing additional memory (optional) Installing additional memory (optional) Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Stand by or Hibernation mode, data will be lost. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data.
Getting Started Installing additional memory (optional) 63 The computer has two memory module slots—Slot A and Slot B. You can install one or two memory modules. If the computer is on, begin at step 1; otherwise, skip to step 3. NOTE 1 If you are replacing memory and need to remove a memory module, refer to “Removing a memory module” on page 66 for procedures. If the computer is on, click Start, then click Turn off computer. See “Using the Turn off command” on page 110 for more information.
Getting Started Installing additional memory (optional) Memory module slot cover Sample locating the memory module slot cover 5 Remove the battery (see “Changing the main battery” on page 129). 6 Using a standard Phillips no. 1 screwdriver, unscrew the captive screw that secures the memory module slot cover, then remove the memory module slot cover. Sample removing the memory module slot cover 7 Place the memory module slot cover in a safe place so that you can retrieve it later. 5.375 x 8.
Getting Started Installing additional memory (optional) 65 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer). 8 Remove the new memory module from its antistatic packaging.
Getting Started Installing additional memory (optional) The clips on either side of the memory module click to secure the memory module. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 11 Replace the memory module slot cover and tighten the screw. 12 Turn the computer over and restart it. You can now continue setting up the computer.
Getting Started Installing additional memory (optional) 67 The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for five seconds, then turn the power on again. 2 Pull the clips away from the memory module. The memory module pops partially out of the slot. 3 Carefully remove the memory module from the slot.
Getting Started Using an external keyboard Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: 1 Click Start, then click Control Panel. 2 Click Performance and Maintenance. 3 Click System. 4 The General tab view automatically appears and shows total memory.
Getting Started Connecting a local printer 69 Connecting a local printer Before you can connect a printer, you need a suitable USB printer cable, which may have been provided with your printer. Otherwise, you can purchase one from a computer or electronics store. Your printer documentation may require you to install the printer software before physically connecting the printer to your computer.
Getting Started Connecting a local printer To connect the printer: 1 If the computer is on, turn it off. 2 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. 3 Plug the printer’s power cable into a live electrical outlet. 4 See your printer documentation for additional configuration steps. For more information on getting your printer to print, see “Printing your work” on page 96.
Getting Started Connecting a local printer 71 Sample Printers and Faxes window 2 Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box 3 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows® XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual for more information. 5.375 x 8.375 ver 2.
Getting Started Connecting a local printer 4 5 If the printer you are setting up: ❖ Is not connected to a network, select Local printer attached to this computer. ❖ Is connected to a network, select Network printer, or a printer attached to another computer. Click Next. The Add Printer Wizard looks for a Plug and Play printer. If it does not locate one, click Next. The Add Printer Wizard prompts you for the printer port.
Getting Started Connecting an optional external diskette drive 73 12 To complete the setup, click OK. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job. TECHNICAL NOTE: Some printers require a specific installation process. In this case, the Windows® XP operating system Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions.
Getting Started Connecting external display devices Sample connecting an optional external USB diskette drive Connecting external display devices Your computer comes with a built-in LCD display, but you can also connect the following types of external display devices to the video ports described below: ❖ A plasma or digital television or VCR/DVD player via the Component Video Out port. ❖ A standard television, projector, or VCR/DVD player via the S-video Out port.
Getting Started Connecting external display devices 75 Sample back of system Connecting the display device If you are connecting a television or other video display device to the computer’s Component Video Out port, first refer to “Selecting video cables” below for guidelines on choosing a video cable, then refer to ’Connecting a standard television, projector, or VCR/DVD player’ below. If you are connecting an SVGA monitor, skip to “Connecting an external monitor or projector” on page 78.
Getting Started Connecting external display devices Connecting a digital or plasma television or VCR/ DVD player TECHNICAL NOTE: You must have digital TV service to watch digital TV on your computer. See your TV service provider for more information. You can watch digital television by connecting to the Component Video Out port on your computer. NOTE You cannot view digital TV on the display device if you are using it as a monitor.
Getting Started Connecting external display devices 77 Connecting a standard television, projector, or VCR/ DVD player NOTE S-video cables are not included with your computer. To connect a device to the S-video Out port, you will need to purchase an S-video cable. To connect a standard television, projector, or VCR/DVD player: 1 Connect one end of the video cable to the external video device. Refer to the documentation provided with the device for the location of its Video In port.
Getting Started Connecting external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen or to display anything on your computer screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer. 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device.
Getting Started Connecting External AV Input Devices 3 79 Release the Fn key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel, and Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and click Apply or OK.
Getting Started Connecting External AV Input Devices Connecting a Set-top box or standard TV antenna You can watch standard television by connecting a Set-top box or antenna to the Antenna In port on your computer. To do this: 1 Connect the television Set-top box or antenna to the coaxial adapter cable. 2 Connect the coaxial adapter cable to the coaxial Antenna In port on the back of your computer. 3 Turn on your computer.
Getting Started Turning off the computer 81 Connecting to the Composite In port The Composite In port provides another way to connect a VCR/DVD player or game console to your computer. To do this: 1 Connect the external device’s video cable to the Composite In port on the back of the computer. 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on your computer. 4 Turn on the external device.
Getting Started Caring for your computer Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data. For more information, see “Powering down the computer” on page 109. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Running the computer on battery power” on page 119.
Getting Started Caring for your computer 83 ❖ If you have the audible warning set, the computer will beep to notify you that it is still on. ❖ If you have an action feature set, the computer will perform one of the following: Nothing, Standby, or Hibernate. Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive indicator light stops glowing) and all external peripheral cables are disconnected.
Getting Started Caring for your computer To secure the computer: 1 Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2 Pass the locking end through the loop. 3 Insert the cable’s locking end into the security lock slot on the computer, then give the key a quarter turn and remove it. The computer is now securely locked. Sample locking the computer 5.375 x 8.375 ver 2.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See “Saving your work” on page 94 for further information.
Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. ❖ Scan all new files for viruses.
Learning the Basics Using the keyboard 87 Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page. ❖ The lowercase letter l (el) and the number 1 are not interchangeable.
Learning the Basics Using the keyboard programs assign separate functions to the right and left Ctrl and Alt keys, or to the regular and numeric pad Enter keys on the full-sized keyboard. Using the Fn key, you can simulate these separate keys, as follows: ❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard. ❖ Press Fn and Enter simultaneously to simulate the Enter key on the numeric pad of the enhanced keyboard.
Learning the Basics Using the keyboard 89 Windows® special keys Start key Application key Sample Windows® special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys Sample numeric and cursor control overlay The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Learning the Basics Using the keyboard Using the overlay to type numeric data To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖ For lowercase letters, hold down Fn while you type the letters. ❖ For uppercase letters, hold down both Fn and Shift while you type the letters.
Learning the Basics Starting a program 91 To turn off the cursor control overlay, hold down the Fn key and press F10 again. The cursor control mode light on the keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows® Explorer. If you prefer to open the program first, you have four options.
Learning the Basics Starting a program To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows® Explorer If a program is not listed in the Programs menu, you can start it from Windows® Explorer. Windows® Explorer gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Learning the Basics Starting a program 93 To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start WordPad: 1 Click Start, then click Run. The Run dialog box appears. Sample Run dialog box 2 In the Run dialog box: ❖ If you know the program’s location, type the command line. For a program in the Windows® folder, type just the program name. Otherwise, type the full file path.
Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see “Setting battery alarms” on page 126. Many programs offer a feature that saves documents at regular intervals, such as every 15 minutes.
Learning the Basics Saving your work 95 2 Choose the drive and folder where you want your file to be stored. 3 Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name. The Windows® XP operating system supports file names of up to 255 characters; the names can include spaces. Some applications still require MS-DOS® file names.
Learning the Basics Printing your work Printing your work Verify that the Windows® XP operating system is set up for your printer as described in “Connecting a local printer” on page 69. TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s). To print a file: 1 If your printer is not on, turn it on now.
Learning the Basics Backing up your files 97 Backing up your files Backing up your files means copying individual files to media, such as CDs, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a writable CD-ROM drive or DVDROM multi-function drive, you may back up files to a writable disc as follows: 1 To back up to a CD or other media, insert the media into the appropriate drive. 2 Click Start, then click My Computer.
Learning the Basics Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Learning the Basics Using the DVD-ROM or multi-function drive 99 Drive components and control buttons The DVD-ROM or multi-function drive is located on the right side of the computer. The Media control buttons are located above the keyboard and can be accessed when the display panel is open.
Learning the Basics Using the DVD-ROM or multi-function drive Media control buttons The control buttons above the computer keyboard let you play audio CDs when the computer is on. You can also use them to play CDs and DVDs when the computer is off using the QosmioPlayer application. For more information on playing CDs and DVDs when the computer is powered off, see “Using QosmioPlayer” on page 160.
Learning the Basics Using the DVD-ROM or multi-function drive 101 The Next track button skips to the following track on the disc. The Record button records television programs which are currently being viewed. NOTE The Record button only works when using the Windows Media Center Edition, and is not operational when using QosmioPlayer. The Brightness button adjusts the screen brightness. The Monitor In button is pressed to establish the connection with the external device.
Learning the Basics Using the DVD-ROM or multi-function drive To avoid damaging a disc or losing data, check that the disc activity light is off before opening the disc tray. HINT: The drive will not open if the computer’s power is off. 2 Grasp the tray and pull it fully open. 3 Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge.
Learning the Basics Using the DVD-ROM or multi-function drive 5 103 Gently press the disc onto the center spindle until it clicks into place. Spindle Correct position Disc Incorrect position Incorrect position Sample positioning the disc on the spindle Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. If you insert the disc incorrectly, it may jam the drive.
Learning the Basics Using the DVD-ROM or multi-function drive To access the Windows Media Player, you can open it through the Start menu or activate it from the taskbar. NOTE When using Windows Media Player, your system may not be able to activate Standby or Hibernation modes. To prevent this from occurring, close Windows Media Player before you select Standby or Hibernation mode.
Learning the Basics Using the DVD-ROM or multi-function drive ❖ 105 To stop the CD, click the Stop button. Before using headphones to listen to an audio CD, turn the volume dial down. Playing the CD with the volume set too high could damage your ears. Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually.
NOTE Learning the Basics Using the DVD-ROM or multi-function drive Copy protection technology included in certain media may prevent or limit recording or viewing of the media. For details on how to use the software, please refer to the respective Online Help menus. Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Learning the Basics Using the DVD-ROM or multi-function drive 107 5 Click the GeForce FX tab. 6 On the nView Display Mode pulldown menu, select Clone. 7 On the Primary/Secondary pulldown menu, select Digital flat panel/TV. 8 In the display box, click the TV 1b icon. 9 Click the Device Settings settings button. The Device Settings menu appears. 10 Select TV format, then select 525i(480i,D1). 11 Click Apply. 12 When the message, “Your desktop has been reconfigured” appears, click Yes. 13 Click OK.
Learning the Basics Using the DVD-ROM or multi-function drive Removing a disc with the computer on Never press the eject button or turn off the computer while the drive-in-use light is glowing. Doing so could damage the disk or the drive. 1 Locate and press the eject button. The disc tray partially opens. 2 Grasp the sides of the disc tray and pull it fully open. 3 Remove the disc from the disc tray and place it in its protective cover.
Learning the Basics Powering down the computer 109 Caring for CD or DVD Discs ❖ Store your discs in their original containers to protect them from scratches and keep them clean. ❖ Do not bend a disc or place heavy objects on top of it. ❖ Do not apply a label to or otherwise mar the surface of a disc. ❖ Hold a disc by its outside edge. Fingerprints on the surface can prevent the DVD-ROM drive or multifunction drive from reading the data properly.
Learning the Basics Powering down the computer the computer to turn on and send or receive the files while you are asleep. TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Learning the Basics Powering down the computer 111 Holding the Shift key while the Turn Off computer Windows dialog box is open, changes the Stand By button to hibernate. For more information about setting up hibernation, refer to “Using Hibernation Mode” on page 112. NOTE Turning off more quickly You can also turn off the computer by pressing the power button. To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility.
Learning the Basics Powering down the computer Sample system power mode settings NOTE For more information about the Power Saver utility, see “Power Saver” on page 243. Starting again after Turn off To start the computer up again, press the power button until the on/off light changes to green. Using Hibernation Mode Hibernation mode shuts the computer down completely, but it first saves the current mode of the computer to the hard disk.
Learning the Basics Powering down the computer 113 Factors to consider when choosing Hibernation: ❖ While in Hibernation mode, the computer uses no battery power ❖ Because the mode of the system is held on the hard disk, no data is lost if the main battery discharges ❖ When starting up again, Hibernation uses less time and battery power than does Turn off computer ❖ Restarting from Hibernation takes a little more time and battery power to start up than restarting from Standby, because information i
Learning the Basics Powering down the computer The computer is now set to automatically enter into Hibernation when your option settings occur. NOTE For more information about the Power Saver utility, see “Power Saver” on page 243. Once the computer is configured, place the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options selected.
Learning the Basics Powering down the computer ❖ 115 When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using Standby and the battery discharges fully, your information will be lost. Be sure to save your work first. To power down the computer using the Standby command, click Start, Turn off computer, and select Stand By.
Learning the Basics Powering down the computer To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 4 Select Stand by for the options you want. ❖ When I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button.
Learning the Basics Toshiba’s online resources 117 Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 280. 5.375 x 8.375 ver 2.
Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power, Standby mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power 119 Running the computer on battery power The computer contains a removable Lithium-Ion (Li-Ion) high-capacity battery that provides power when you are away from an AC outlet. You can recharge it many times. Battery Notice Battery life may vary, depending on applications, power management settings, and features utilized. Recharge time varies depending on usage. The battery may not charge while the computer is consuming full power.
NOTE Mobile Computing Running the computer on battery power For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power. The QosmioPlayer is not a Windows-based application. Battery life is less than when using similar applications in the Windows Operating System. NOTE Over a period of time, and depending on the usage of the computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology.
Mobile Computing Charging the batteries 121 Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries If you spend a lot of time traveling and need to work for many hours without an AC power source, you may want to carry additional charged batteries with you.
Mobile Computing Charging the batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur.
Mobile Computing Charging the batteries 123 The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM NOTE The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer.
Mobile Computing Monitoring battery power 125 Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures.
Mobile Computing Monitoring battery power What to do when the battery runs low When the battery runs low you can: ❖ Plug the computer into an external power source and recharge the battery. ❖ Put the computer in Hibernate mode and replace the battery with a charged spare. ❖ Save your work and turn off the computer. If you do not set any of these options before the battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off.
Mobile Computing Monitoring battery power 127 Before your computer runs out of battery power, save your data and take one of the following actions: ❖ Suspend or turn off your computer. ❖ Turn off your computer and replace the main battery with a charged one. ❖ Connect your computer to an AC power source.
Mobile Computing Monitoring battery power Power profiles in Windows XP In Windows® XP, you can choose from predefined power profile or select your own combination of power management options. The following steps describe this procedure. NOTE If you try to use the power management feature in Windows, a message tells you to close the Microsoft power options and use the Toshiba Power Saver instead. 1 Open the Start menu, click Control Panel, then Performance and Maintenance.
Mobile Computing Changing the main battery 2 129 While continuing to press Fn, press F2 until you select the desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. 3 Release the Fn key. The pop-up window disappears. You are now in the selected mode. For more information on setting the battery power profile, see “Power Saver” on page 243.
Mobile Computing Changing the main battery Removing the battery from the computer 1 Save your work. 2 Turn off the computer. 3 Remove all cables connected to the computer. 4 Turn the computer over. 5 If the battery lock is in the locked position, slide it toward the unlocked position. Sample sliding the battery lock to the unlocked position 6 Slide and hold down the battery release latch. Sample sliding the battery release latch 5.375 x 8.375 ver 2.
Mobile Computing Changing the main battery 7 131 While holding the battery release latch, pull the discharged battery out from the back of the computer. Sample removing the discharged battery pack If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries” on page 135.
Mobile Computing Changing the main battery Sample inserting a new battery pack If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. 2 Ensure the battery release latch clicks into place. 3 Slide the battery release lock to the locked position. 4 Turn the computer right side up. 5 Reconnect the cables and turn on the computer.
Mobile Computing Taking care of your battery 133 Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life. Safety precautions ❖ If the battery pack produces an odor, overheats or changes color or shape while it is being used or charged, turn off the computer’s power immediately and disconnect the power cord from the power socket. Carefully remove the battery pack from the computer. ❖ Do not try to disassemble a battery pack.
Mobile Computing Taking care of your battery ❖ When you install the battery pack, you should hear a click when it is seated properly. ❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below: 1 Turn off the computer’s power.
Mobile Computing Disposing of used batteries 135 ❖ Disconnect the AC adapter when the battery is fully charged. Overcharging makes the battery hot and shortens life. ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adapter. ❖ Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries The life of a battery pack should last for years.
Mobile Computing Traveling tips Traveling tips The environmental precautions listed in “Selecting a place to work” on page 42, also apply while traveling. ❖ Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust. ❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs.
Chapter 4 Exploring Your Options In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows® XP Media Center Edition operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system.
Exploring Your Options Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Taskbar System tray Sample Windows® XP Media Center Edition operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Exploring Your Options Exploring the desktop 139 The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer—The Microsoft® browser that provides access to the Internet.
Exploring Your Options Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows. To make a program or window the currently active one, click the associated taskbar button.
Exploring Your Options Setting up for communications 141 Setting up for communications Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: ❖ Access the Internet. ❖ Communicate with your office’s local area network (LAN), or a larger corporate wide area network (WAN). For specific information about connecting to a LAN or WAN, consult your network administrator. ❖ Send a fax directly from your computer.
Exploring Your Options Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Exploring Your Options Setting up for communications 9 143 Click OK to close the properties dialog box for that specific modem. 10 Click OK to close the Modem Properties dialog box. 11 Close the Control Panel. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Exploring Your Options Setting up for communications The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Exploring Your Options Setting up for communications 3 145 Enter the phone number of your network connection and let the program dial the number. The computer connects to the network. Using the Ethernet LAN Port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can reconfigure Windows to disable the LAN port.
Exploring Your Options Setting up for communications Using Wireless LAN Connectivity NOTE The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. Your system may come with an optional wireless LAN module.
Exploring Your Options An overview of using the Internet 147 Using the optional Bluetooth™ module Bluetooth™ is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables. NOTE You can use Bluetooth and Wi-Fi® devices at the same time. To enable a wireless device, use the Fn + F8 hot key (refer to “Enabling a wireless device” on page 288 for more information).
Exploring Your Options An overview of using the Internet ❖ ’Internet features’ ❖ ’Uploading and downloading files from the Internet’ The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information.
Exploring Your Options An overview of using the Internet 149 Connecting to the Internet To connect to the Internet, you need: ❖ A modem and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account The Microsoft® Web browser Internet Explorer is automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you in setting up your computer to work with your existing ISP.
Exploring Your Options An overview of using the Internet known as links. Clicking a link automatically transfers your Web browser to that site. You can also use a Search Engine, a Web site specifically designed to help you look for information. Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive your own email, you need a mailbox on the Web or an email address.
Exploring Your Options Exploring audio features 151 There are several ways to upload or download data. It can be as simple as attaching a file or document to an email, or you can use the File Transfer Protocol (FTP) features of your Web browser to transfer large amounts of data. Exploring audio features You can use your computer to record sounds using an external microphone or the computer’s built-in microphone which is located on the front of the computer. You can play .
Exploring Your Options Exploring audio features Using a microphone To record high-quality sounds, you can use the internal microphone or attach an external microphone: 1 Connect an external microphone to the computer, by locating the microphone jack near the front of the right side of the computer. 2 Plug the microphone cord into the jack. 3 Turn on the microphone. NOTE 4 You may use the built-in microphone located on the front of your computer.
Exploring Your Options Exploring audio features 153 The Sound Recorder window displays the new sound file as a waveform. NOTE Sound Recorder can only record 60 seconds at a time. 8 To hear what you just recorded, click the Play button. 9 To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires. Experiment to find a balance that fits your needs. 1 Open Sound Recorder, if necessary.
Exploring Your Options Inserting and removing PC Cards 155 Inserting a PC Card NOTE Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert a PC Card: 1 Turn off the computer. You may also hot swap a PC Card.
Exploring Your Options Inserting and removing PC Cards Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. 1 Locate the PC Card eject button. 2 Press the PC Card eject button once to extend it, and push it in to remove the PC Card. Sample ejecting a PC card The PC Card ejects slightly from the slot. 3 Grasp the edges of the PC Card and slide it out of the slot.
Exploring Your Options Using the Bridge Media slot 157 Using the Bridge Media slot Your computer is equipped with a Bridge Media Slot, which supports the use of Memory Stick or Memory Stick PRO media, Secure DigitalTM (SDTM) Cards, or xD-Picture Cards. This media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc. NOTE Do not use the Copy Disk function for this type of media.
Exploring Your Options Using the Bridge Media slot Do not remove Memory Stick media while data is being written or read. Even when the message “copying...” in the windows disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out. Removing Memory Stick or Memory Stick PRO media 1 Right-click the Safely Remove Hardware icon on the System tray. After the media is stopped, it is safe to remove.
Exploring Your Options Using the Bridge Media slot 159 Do not touch the SD™ connector (metal area). You could expose the storage area to static electricity, which can destroy data. Do not remove an SD™ Card while data is being written or read. Even when the message “copying...” in the windows disappears, writing to the card might still be in progress and your data could be destroyed. Wait for the indicator light to go out.
Exploring Your Options Using QosmioPlayer Do not touch the xD-Picture™ 5.375 x 8.375 ver 2.
Exploring Your Options Using QosmioPlayer 161 To start the QosmioPlayer: 1 NOTE If the computer is on, turn it off or place it in Hibernation mode. The computer must either be off or in Hibernation mode for QosmioPlayer to start. If the computer is powered on or in Stand By mode, turn off the computer before trying to start QosmioPlayer. 2 Press the appropriate Media Control button on the system control panel: ❖ To watch television, press the TV button.
Exploring Your Options Using QosmioPlayer Stop/ Eject Play/ Pause CD/ DVD Next track Previous track Brightness Record Monitor In TV Out TV Sample CD Player Media Control buttons NOTE The Record button only works when using the Windows Media Center Edition, and is not operational when using QosmioPlayer. Playing an audio CD Insert a supported audio CD into your DVD-ROM/multifunction drive. The QosmioPlayer automatically recognizes and plays supported CDs.
Exploring Your Options Using QosmioPlayer 163 CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow the CTRL+DOWN Arrow keys to decrease the volume. keys D Pressing this key displays the CD status. E Pressing this key ejects the CD from the drive. CTRL+R Press the CTRL+R keys to repeat the current song. SPACE Press this key to pause the song currently playing. Press the key again to start playing the song. CTRL+SPACE Press the CTRL+Space keys to stop the CD.
Exploring Your Options Using QosmioPlayer When playing a DVD, you have the following options: F1 Press this key once to display the basic DVD guide options. Press the key twice to display the full DVD guide options. Press the key again to hide the DVD guide options. 0-9 Press a number on your keyboard to play a specific DVD chapter. CTRL+UP/ DOWN Arrow keys Press the CTRL+UP Arrow keys to increase the volume, press the CTRL+DOWN Arrow keys to decrease the volume.
Exploring Your Options Using QosmioPlayer 165 TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you cannot view the DVD because of a region error, be sure to change the region code in the Windows® operating system. The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs from that last region.
Exploring Your Options Using QosmioPlayer When viewing television programs, you have the following options: 0-9 Press a number on your keyboard to watch a specific channel. PAGE UP/ DOWN Press the PAGE UP key to scroll backward through channels, press the PAGE DOWN key to scroll forward through channels. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow the CTRL+DOWN Arrow keys to decrease the volume.
Exploring Your Options Using QosmioPlayer 167 Sample pressing the Monitor button 3 Press the Monitor button to close and exit the external device environment and return to Windows or the QosmioPlayer. Remote Control for QosmioPlayer You can use your remote control with QosmioPlayer to play CDs and DVDs, and to watch television programs through QosmioPlayer.
Exploring Your Options Using QosmioPlayer Remote Control Buttons Overview STOP D OR PAU SE REC Power Stop Record (Functional only with MCE) Rewind Pause Play Forward FWD REW Skip Replay REPLAY SKIP More (Functional only with MCE) Back BACK OK Arrows MORE OK Button START Volume Control CH PG VOL MUTE Start Channel/ Page Control Mute Recorded TV (Functional only with MCE) DVD Menu RECORDED TV GUIDE LIVE TV DVD MENU Live TV Guide (Functional only with MCE) Sample Remote Contr
Exploring Your Options Using QosmioPlayer 169 The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode. If the computer is running Windows or QosmioPlayer, pressing Power turns off the computer. Stop — Stops the media currently playing. Record — Functional only with Media Center Edition. Rewind — Moves the media (DVD or music) backwards. Replay — Moves media (DVD or music) backwards.
Exploring Your Options Using QosmioPlayer Mute — Disables your computer’s sound. Press again to enable sound. DVD Menu — Turns on QosmioPlayer’s CD/DVD function. Live TV — When the computer is off, turns on QosmioPlayer and displays a live TV program. Remote Control Button Groups Use your remote control to navigate all the QosmioPlayer windows. Your remote control includes three major groups of controls. ❖ Media play — The media play buttons control the play of DVDs and CDs.
Exploring Your Options Using QosmioPlayer 171 Media Playback Buttons These buttons allow you to play back music files, playlists, music CDs, and DVD movies from within QosmioPlayer. Use Pause to turn off QosmioPlayer. Press Play to play selected media. Use Forward to move selected media forward. Press Forward up to three times to increase the fast forwarding speed. Use Rewind to rewind selected media. Press Rewind again to increase the rewinding speed. Use Stop to stop the media currently playing.
Exploring Your Options Removing QosmioPlayer ❖ NOTE To play a DVD/CD, press the DVD Menu button to start QosmioPlayer in DVD mode. Once QosmioPlayer starts, you can use the Live TV and DVD Menu buttons to switch between TV and DVD modes. Removing QosmioPlayer You can remove QosmioPlayer from your computer and reclaim approximately 100 MB of hard disk drive space. 1 Click Start, then click Control Panel. 2 Click Add or Remove Programs. 3 Click QosmioPlayer, then click the Change/Remove button.
Exploring Your Options Installing the QosmioPlayer Recovery media 173 boot up the computer with the QosmioPlayer disc in the drive and select option 3: Delete “QosmioPlayer.” If you delete the QosmioPlayer using the Qosmio player media, you will not retrieve 5.375 x 8.375 ver 2.
Exploring Your Options Installing the QosmioPlayer Recovery media On systems with QosmioPlayer previously uninstalled using the Windows® “Add/Remove Programs” If you have previously removed QosmioPlayer from your computer, and wish to reinstall it, doing so will require you to recover the entire system using the Recovery media that shipped with your computer after the QosmioPlayer installation has been completed.
Exploring Your Options Installing the QosmioPlayer Recovery media 175 On systems with QosmioPlayer currently uninstalled using the QosmioPlayer media To reinstall QosmioPlayer on a computer that the application was removed from by using the QosmioPlayer Recovery media: 1 Insert the QosmioPlayer Recovery media into the drive, close the drive tray, and restart your computer from the disc. 2 Press the 1 key on the computer’s keyboard to recover to the initial configuration.
Chapter 5 Getting to Know the ® Windows XP Media Center Edition 2005 This section introduces you to the Windows® XP Media Center Edition 2005, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control. With the Media Center, you can: ❖ Watch TV or a DVD movie. ❖ Automatically record TV shows.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup 177 Media Center Setup This section shows you how to set up your computer to use the Media Center. There are many different methods you can use to connect your television and computer which are covered in the following sections. Connecting to a Television Your computer has TV-out capability, meaning you can connect it to a television and view the computer image on the television.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Some stations may not come in clearly if the signal is not strong enough. If you do not have a Set-top box, you may need to purchase a signal amplifier which may help boost and improve the cable signal. Contact your service provider for the proper hardware recommendations. There are two ways to connect your computer to a TV: 1 Turn off the computer.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup 179 Connecting the TV Signal Source When You Have an Existing Setup This section describes how to connect the signal source from the wall to a VCR/DVD player to a TV using two coaxial cables (not shipped with your computer or system). 1 Remove the coaxial cable from the VCR/DVD player input, and connect it to the input of a coaxial cable signal splitter (not shipped with your computer or system).
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup VCR/DVD player or Set-top box to the S-video in port on the back of the computer.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 2 181 Connect the IR remote sensor cable (small 3.5 mm) connector to one of the ports on the IR receiver. Sample IR receiver with cables attached 3 Position the end of the IR receiver cable over the remote IR receiver window on your cable TV Set-top box or VCR/DVD player. 4 Peel off the adhesive backing on the IR remote sensor and mount the sensor within 5 inches of the Set-top box or VCR/DVD player.
NOTE Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center The first time you open Media Center, the program displays a setup wizard. You will use the wizard to test your remote control and configure your Internet connection, TV signal, Television Program Guide, and speakers. To complete the setup procedure you need to: Log on as an administrator. For more information, refer to your Microsoft Help.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 183 Sample Media Center Setup Wizard: Welcome screen 1 Click Next. The wizard displays the Media Center Setup screen. 2 Click Next. The wizard displays the Media Center Privacy Policy screen. 3 Read the Media Center Privacy Policy, then click Next. The wizard displays the Get the Most from Media Center screen. 4 Click About Privacy and read the privacy notice.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center ❖ If the connection is not working, the wizard displays an error message. Recheck both ends of your connection and click Test. ❖ If the connection is working, the screen displays a message to that effect and highlights the Next button. When the connection is working correctly, click Next. The wizard displays the Required components have been set up screen. 10 Click Next.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center NOTE 185 When you set up the TV Signal and identify the Set-top box remote, you may receive a “Remote Not Recognized” message. When this occurs, you must select the Have Media Center Learn My Remote Again From Scratch option. When you get to the Test Channel Changing option, the set up program asks you to use the Media Center remote. To change the channels, use the numbers on your keyboard.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center The wizard displays the Enter Your ZIP code screen. 18 Use the numeric keys on your keyboard to enter your ZIP code, then click Next. The wizard displays the Download Provider Information screen. The Media Center connects to the internet and begins to download information about your local TV provider. The screen displays a message when the download is complete. 19 Click Next.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 187 28 Click Finish this wizard, then click Next. The wizard displays the You Are Done! screen. 29 Click Next. The wizard displays the Optional Setup screen. 30 Select Set up your speakers, and then click Next. The wizard displays the Welcome to Speaker Setup screen. 31 Click Next. The wizard displays the Choose number of Speakers screen.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Using Media Center NOTE You can run Media Center side by side with other Windows software programs. It is possible to browse through your pictures, watch videos, play music, and even record TV while using other Windows programs. Simply resize the Media Center window as you would any other window. For more information, refer to the online Help.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ 189 Change your Media Center Settings When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help. Home screen Back Help Sample Title Bar Icons Use the Media Playback controls at the bottom of the screen to control your movies, music, and photo displays.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Navigating Media Center In the Media Center windows a selected item, such as a folder, file, or menu item is outlined with a green border. To select items, use the arrow buttons on the remote control, and then the OK button to enter your selection. If you have media playing, such as music or a television program, it displays in an inset window in the lower left corner.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center 191 MCE Remote Control Buttons Overview STOP PAU SE Stop Record REC Power D OR Pause Play Forward Rewind Replay FWD REW REPLAY Skip SKIP Back Arrows More BACK OK MORE OK Button START Volume Control CH PG VOL MUTE Start Channel/ Page Control Mute Recorded TV DVD Menu RECORDED TV GUIDE LIVE TV DVD MENU Live TV Guide The MCE Remote Control The remote control has the following buttons/functions: Power —
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Stop — Stops the media currently playing. Record — Records the selected television program and stores it on your hard disk. Rewind — Moves the media (video, DVD, music, and so on) backwards. Replay — Moves media (video, DVD, Music, and so on) backwards. Back — Displays the previous window. Arrows — Moves the cursor to navigate within Media Center windows.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center 193 Channel/Page Control — Changes the TV channel or moves a page up and down, depending on the available options. Mute — Disables your computer’s sound. Press again to enable sound. DVD Menu — Opens the main menu on a DVD movie, if available. Live TV — Takes you to the current point in a live TV program after pausing live TV. Remote Control Button Groups Use your remote control to navigate all the Media Center windows.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center When the computer is powered on, use this button to launch Media Center. ❖ Guide launches Media Center into the TV program guide mode when the computer is powered off or in Hibernation mode. Use this mode to display a list of TV programs available for viewing. When the computer is powered on, use this button to launch Media Center.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ 195 Moves a TV program (that has been paused or stopped) forward to the current moment in live TV, and then begins playing. To stop forward progress of the media, press Play. Use Record to record TV programs. This button is inactive when other media is playing. ❖ While watching live TV or in the Guide, you can press the Record button once to record a TV show.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs ❖ For DVDs, Previous moves to the previous chapter. ❖ For videos and live TV and videos, Previous moves back seven seconds. Using the Media Center Remote Control To begin using your remote control: 1 Point the remote control at the remote sensor. The remote sensor should be located near your monitor or in a convenient place.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 197 Sample Media Center main window, My TV In My TV you can: ❖ Search for TV shows to watch or record using the Television Program Guide. ❖ Watch your favorite television programs in full screen mode or in an inset window. ❖ Pause, stop, rewind, and fast forward live TV, similar to the way you would control a DVD from a DVD player. ❖ Record a single TV show or an entire series.
NOTE Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs If your computer enters Standby mode while you are viewing television, and you resume the computer, the live TV screen will be blank. Press the OK button to return to live TV. To watch a television program: 1 Press Live TV on the remote control. The last channel selected or the first channel available begins to play in full screen mode.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 5 ❖ NOTE 199 Press OK on the remote to select the program that you want to view. Media Center displays a detailed description of the program at the bottom of the screen. ❖ If the program is live, press Watch to view the program. ❖ If the program is not currently playing, press Record to record the program. You can have Media Center automatically connect to the Internet and update your Guide.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs To watch a previously recorded TV program: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My TV. 3 Select Recorded TV. All of your recorded TV programs display on the Recorded TV screen. NOTE You can sort your programs by Date or Title by clicking the desired sort option.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 201 Use the arrow buttons to move through the list, select a program, and then press OK on the remote control. Select the option, and make the required changes. 5 Press OK. NOTE You can resolve recording conflicts on the Scheduled screen. NOTE To return to the previous menu, press Back on the remote, or click the back arrow at the top of the screen.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV program description, and then press OK on the remote control. Media Center displays the search results. 5 Use the arrow buttons to scroll through the search results, select a show, and then press OK. If the show appears multiple times, select a time and press OK. If the show is not currently playing, select Record Show or Record Series, and then press OK.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV 203 If a show is currently being recorded, the Record icon also appears in the taskbar on the desktop. If you move your mouse over the icon, the Media Center displays which show is currently being recorded. You can right-click the icon to open Media Center and stop recording. Media Center automatically records until the show is scheduled to be over as listed in the TV Guide.
❖ NOTE Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Some channels can be shared by two or more networks, depending on the time of day. The Guide may display only one network’s programming. This may cause recording options to be unavailable. You may need to manually update the Guide before scheduling a recording. If you turn off your computer, the Media Center will not record a scheduled program. Your computer must be turned on or in Stand By mode to record a TV program.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV 205 Recording from Search To record a current or future show or series using Search: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My TV. 3 Select Search. 4 Select Title, Keyword, or Categories. For Title and Keyword searches, enter your descriptive search words. The Media Center starts searching from the first letter you type into the text box.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV To manually record a show or series: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My TV. 3 Select Recorded TV. 4 Select Add Recording. 5 Select the channel using the Channel/Page button on the remote. 6 Under the Create a custom recording with area, select Channel and Time.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV 207 well as how it plays DVDs. In particular, you can change settings for: ❖ Recording a TV program, including manually recording ❖ The TV Guide ❖ The TV Signal ❖ Adjust display settings ❖ Audio settings To make a change, click on the desired setting.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Watching and Recording Movies To watch or record a movie: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window 2 Select the movie that you want to watch or record. 3 Click OK. ❖ If the movie is playing now, click Watch or Record TV movie on now. ❖ If the movie is playing later, click Record.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 209 Creating Your Music Library Using Windows Media® Player Each time you add music files outside of Windows Media Player, you must use the Tools menu to add music files to your Windows Media Player Library. This will ensure that Media Center can find them. To add music files: 1 Click Start on the taskbar, and then click Windows Media Player. 2 Click the Library tab at the top of the window.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Deleting Music Files To delete a file from the Windows Media Player Library, select the music file, right-click the mouse, and then select Delete.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 211 3 Select an option from the Search on drop-down menu. 4 Select Search to search all drives or select Browse to search through a specific drive. 5 Click Search. Windows Media Player searches the selected drives for all supported audio files and adds them to the Media Library. If Windows Media Player does not recognize all of your audio files, try copying the files directly into Windows Media Player.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music audio player, Windows opens this program and begins playing the CD. 2 Press the Start button on the remote control. 3 Insert a CD into the CD drive — the CD plays automatically in Media Center. If you have other media such as live TV already playing when you insert the CD, Media Center asks you if you want to play the CD. Select Yes to begin playing the CD. Media Center cannot be used to record music files.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 4 NOTE 213 Use the arrow keys to select a music file, press OK on the remote, and then press Play on the remote control to begin playing that music file. If you back up music files from a CD using Windows Media Player, you must log the files into the Media Player’s play list before you can play them using the Media Center.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Setting Up an Automatic Disc Jockey You can select to have Media Center randomly play all the available songs in one genre: 1 2 3 4 5 Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select My Music. Select Genres. The list displays all the genres available in your Media Library. Use the arrow buttons to select a genre, and then press OK on the remote control.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music ❖ 215 Play (play the selected album). When you select this option, the Now Playing window opens, and the album starts playing. ❖ Buy Music (connect to the Internet, find CD information, and buy music CDs). To go back to Media Center, press Start on the remote control. ❖ Visualize (view an image) ❖ 5 NOTE Edit Queue (edit the songs in the queue) Press Back on the remote control to return to the previous window.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures 5 Drag the music files to the right side of the Media Player window. You can also select the music file and click the Add selection to the current list icon. 6 Left click the Now Playing list menu and select Save Playlist As. Enter the name of the Playlist in the Save as window, and click Save. 7 Select your playlist to view the music files that you have added.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures 217 ❖ Sort pictures by name or date. ❖ View and scroll through pictures that are in the My Pictures folder by using your remote control or your keyboard and mouse.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures Viewing a Slide Show To view pictures as a slide show 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My Pictures. 3 Use the arrow buttons on the remote control to select the folder of pictures you want to view as a slide show, and then press OK.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies 219 Watching Your Digital Movies The My Videos window in the Media Center makes it easy to play home video files you created or video files you downloaded from the Internet. Sample Media Center main screen In My Videos you can: ❖ Browse through and play back all of your digital video files using the remote control or the keyboard and mouse. ❖ Sort videos by name or date.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies If not, move your videos into the My Videos or Shared Videos folder in Windows Explorer for Media Center to be able to find and play them. Once you have placed all your videos into the My Videos or Shared Videos folder, you can rename, add, delete, and organize them into folders. To organize and store your videos, click Start on the taskbar, click My Documents, and then double-click the My Videos folder.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies 221 mouse to resize the window if you want to watch your video while doing something else on your desktop. 5 When the video is finished, select Restart and then press OK to replay the video. You can also select Done and press OK to close the file and return to the My Videos window.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD Watching a DVD Watching DVDs in the Media Center allows you to control the playback with your remote control. If you select to play your DVD in another program, the use of some of the remote control buttons is not supported. Sample Media Center main menu To play a DVD movie in Media Center 1 Insert the DVD into the drive. If you have other media playing, Media Center asks if you want to play the DVD. Select Yes or No.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD 223 3 Press Stop on the remote control to stop playing the DVD. 4 To change the window size, move the mouse and click the Resize button on the taskbar of the DVD window. Stopping a DVD Movie 1 Press the Stop button on the remote control to stop the movie. 2 Use the arrow buttons on the remote control to select an item on the Stopped menu, and then press OK. ❖ Select Resume to begin playing the DVD where you left off.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing the Media Center Settings In the Media Center Settings window, you can change settings for watching television, for viewing your pictures and slide shows, and for controlling sound and the display of all the Media Center windows. Sample Media Center Settings screen The following section describes some of the more common settings that a user might want to change.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 3 225 Select General. The General Settings screen includes the following options: 4 ❖ Select Startup and Window Behavior to change Media Centers startup and window behavior, for example, you can elect to start Media Center when Windows starts. ❖ Select Visual and Sound Effects to turn transition animations or navigation sounds on or off.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing TV Recorder Settings The TV Recorder settings allow you to control your recording priorities and options in Media Center. 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select Settings. 3 Select TV. 4 Select Recorder.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 227 About Recorded TV Storage Space Settings The space available for recording TV programs depends on your hard disk allocation, drive size, and default recording quality selections. Your computer requires a certain amount of space to run your Windows XP operating system, run software programs, and store data files. If your hard disk becomes full, it may affect your computer’s speed and performance.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Change TV Guide Settings In the Guide Settings, you can select which channels to display and you can manually update your Guide from the Internet. TV Guide settings are the same for each user and can be changed only by the administrator of the computer. To change the TV Guide settings: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 229 5 Use the arrow buttons to select an option, and then press OK on the remote control. Make required changes, if any. 6 Press the Back button on the remote control to return to the TV Settings window. Changing Parental Controls for TV Viewing Only the administrator of the computer can change the Parental Control setting. This feature may not be available on your computer.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 6 Use the arrow buttons to select Turn on movie blocking, and then press OK. 7 Use the arrow buttons to select Block unrated movies, and then press OK. 8 Use the arrow buttons to select the + or - area. Press the OK button on the remote control to scroll through the movie rating levels.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 231 Selecting Close Captioning The audio settings window allows you to select closed captioning. Close captioning displays the TV’s spoken audio in text format for those who are unable to hear the audio. To select close captioning: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select Settings. 3 Select TV. 4 Select Close Captioning.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Sample Picture Settings screen 4 Use the arrows and OK button on the remote control to select or deselect options. 5 Select Save. 6 Click OK. 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 More Programs 233 More Programs Sample Media Center main screen Use the options on the More Programs screen, available from the Media Center’s main menu, to perform the following tasks: ❖ Select Create CD/DVD to create a CD or DVD. ❖ Select InterVideo to view and adjust the InterVideo Video & Audio Settings screen. ❖ Select Messenger to sign into Media Center’s Messenger program.
Getting to Know the Windows ® XP Media Center Edition 2005 Online Spotlight Sample More Programs main screen Online Spotlight Use the Online Spotlight screen, available from Media Center’s main screen, to purchase and download music, DVDs, and movies, and read news and sports stories. Tips on Media Center are also available for viewing from this screen. 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 Getting Help for Media Center 235 Getting Help for Media Center Click the Help icon at the top left of the screen to access Media Center’s Help screen, which includes a number of links to helpful information on Media Center, as well as help for hardware problems. Sample Media Center main Help screen 5.375 x 8.375 ver 2.
Chapter 6 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ Fn-esse® ❖ Hotkey utility ❖ TOSHIBA Console ❖ Toshiba Hardware Settings ❖ Power Saver ❖ Using a supervisor or user password 236 5.375 x 8.375 ver 2.
Toshiba Utilities Fn-esse® 237 Fn-esse® Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any Windows® program without using the Start menu. For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer. This section describes how to use the Fn-esse program to quickly access your programs and files.
Toshiba Utilities Fn-esse® The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray. There are two ways to assign a key to open a program or document: ❖ Using drag-and-drop ❖ Using the keyboard or pointing device The method most often used is drag-and-drop.
Toshiba Utilities Fn-esse® 239 The program or document is now associated with the key you just selected. To open the program or document, press Fn plus the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys To assign a key to open a program or document, start Fn-esse and either: ❖ Using the keyboard, press and hold the Fn key, then press the desired assignment key.
Toshiba Utilities Fn-esse® Making a popup assignment 1 Select Popup... to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder. These are the items that will appear in the popup list.
Toshiba Utilities TOSHIBA Console 241 ❖ To change the key assignment, click Direct... or Popup... and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting Toshiba Console selection.
Toshiba Utilities TOSHIBA Console Customizing Your Computer The features available in this category are: ❖ Power Management ❖ Mouse ❖ Hotkey assignment (for detailed information, see “Fn-esse®” on page 237) ❖ Toshiba Hardware Settings ❖ Toshiba Button Controls ❖ ConfigFree ❖ CD/DVD Drive Acoustic Silencer ❖ Toshiba Picture Enhancement Utility Network The Network category features the following utilities: Connectivity Doctor Bluetooth Start Bluetooth Settings Bluetooth Local COM Setting
Toshiba Utilities TOSHIBA Console 243 Power Saver The Power Saver feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Console, double-click the Power Management icon. The TOSHIBA Power Saver Properties window appears.
Toshiba Utilities TOSHIBA Console Profiles This section lists the preset profiles along with the estimated battery life for each mode. The preset profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life Although you can change the properties for any of these profiles, this is not recommended. If you need a customized profile, create a new profile with the properties you require.
Toshiba Utilities TOSHIBA Console 245 Mouse utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Console, double-click the Mouse icon. Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate: 1 Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears.
Toshiba Utilities TOSHIBA Console Toshiba Hardware Settings Toshiba Hardware Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then Printers and Other Hardware. Then click the Toshiba HWSetup icon. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes.
Toshiba Utilities TOSHIBA Console 247 ❖ USB—Allows you to enable or disable USB Legacy Emulation ❖ LAN—Allows you to set networking functions ❖ Button Setting—Allows you to set conditions for the Power Button ❖ Start Up Logo—Allows you to set a start up logo ❖ Start Up Sound—Allows you to set a start up sound By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function.
Toshiba Utilities TOSHIBA Console Clicking the Monitor Input Settings button displays a screen for selecting external input settings for devices such as video cameras and games. Sample Monitor Input Settings screen CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility, available on the Toshiba Console, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable. 5.375 x 8.375 ver 2.
Toshiba Utilities Setting passwords 249 The CD/DVD Drive Acoustic Silencer does not operate when running QosmioPlayer. Please use Windows Media Center or Media Player if you want to use the CD/DVD Drive Acoustic Silencer. When you change the CD/DVD drive to “Quiet” mode, the setting is only valid for the current Windows session. If you shut down, restart, log off, or resume from hibernation, the setting will revert back to Normal speed.
Toshiba Utilities Setting passwords Hardware Setup. This is useful if more than one person uses the computer. When setting up the various passwords, keep the following in mind: ❖ The user password can be set up under the supervisor password. ❖ The supervisor password must be set before the user password, or the user password must be deleted and then re-entered after the supervisor password is set. TECHNICAL NOTE: When you delete the supervisor password, the user password is also deleted.
Toshiba Utilities Setting passwords 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears. 3 251 On the left side, select Security. Sample TOSHIBA Console Security window 4 Select the Supervisor Password icon. 5 Click Set. 6 Type your password in the Input box. 7 Retype your password in the Input again box. 8 Click Set.
Toshiba Utilities Setting passwords Deleting a supervisor password To cancel the power-on password function: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears. 3 On the left side, select Security. 4 Select the Supervisor Password icon. 5 Select Verify by Password.
Toshiba Utilities Setting passwords 6 Type your password in the Input box. 7 Retype your password in the Input again box. 8 Click Set. 9 Click OK. 253 Disabling a user password To cancel the power-on password function: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. 3 On the left side, select Security. 4 Select the User Password icon. 5 Select Verify by Password.
Chapter 7 If Something Goes Wrong Some problems you may encounter when using your notebook computer are relatively easy to identify and solve. Others may require help from your dealer or the manufacturer of a software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems that are easy to fix 2 255 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with step 3. 4 Close the remaining programs one by one by selecting the program name, then End Task. 5 Click Start, Turn off computer.
If Something Goes Wrong Problems when you turn on the computer 5 Add a paragraph break and type some notes describing what you were doing when you received the message. 6 Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cord/cable properly or installed a charged battery.
If Something Goes Wrong The Windows operating system is not working ® 257 The computer displays the WARNING RESUME FAILURE message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory and not saved has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information, see “Power and the batteries” on page 265. The computer displays the Non-System disk or disk error message.
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This section describes each option and when to use the procedure. To open the Startup menu: 1 Restart your computer. 2 Press F8 when your computer starts.
If Something Goes Wrong The Windows operating system is not working ® 259 See your Windows® documentation for further explanation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, time of day (when everyone else is surfing, your access can be slow), and popularity of the site.
If Something Goes Wrong Resolving a hardware conflict To access Windows® XP Help and Support: 1 Click Start, then click Help and Support. The Help and Support window appears. 2 Then do one or both of the following: ❖ In the search field, type the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem about which you would like help from the listings and follow the on-screen instructions.
If Something Goes Wrong Resolving a hardware conflict 261 A plan of action The smooth operation of the system depends on the interaction of all devices, programs, and features. If the system or one of its attached devices is not working, resolving the problem can be time-consuming and frustrating. The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
If Something Goes Wrong Resolving a hardware conflict Resolving conflicts There are three things you can do to resolve hardware conflicts: ❖ Disable the device. For an older device, remove it from the computer. ❖ Disable another system component and use its resources for the new device, see “Fixing a problem with Device Manager” on page 262 below. ❖ Reconfigure the device so that its requirements do not conflict.
If Something Goes Wrong Resolving a hardware conflict 263 5 In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front. This is the disable feature. 6 Click the icon. You are given the option of disabling the device. 7 Click yes or no, whichever is appropriate. Checking device properties Device Manager provides a way to view the properties of a device.
If Something Goes Wrong Resolving a hardware conflict A Troubleshooting button is also present. 7 Click troubleshooting. A Help and Support window for that device appears. For more information about Device Manager, refer to Windows® XP online help. Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: 1 Click Start, then click Turn off computer. 2 Click Turn Off.
If Something Goes Wrong Resolving a hardware conflict 265 Power and the batteries Your computer receives its power through the AC adapter and power cord/cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cord/ cable will neither power the computer nor recharge the batteries.
If Something Goes Wrong Resolving a hardware conflict If the battery light does not glow after 20 minutes, the battery may have reached the end of its useful life. Try replacing it. The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Saver utility.
If Something Goes Wrong Resolving a hardware conflict 267 computer. Also try connecting the keyboard when the computer is off, and then powering the computer on. Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing Fn and F1 simultaneously.
If Something Goes Wrong Resolving a hardware conflict box. The Appearance tab of this dialog box allows you to choose the colors for the screen. The Settings tab allows you to choose the screen resolution. The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: 1 Point at the desktop and click with the secondary control button.
If Something Goes Wrong Resolving a hardware conflict 269 Small bright dots appear on your TFT display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. The small bright dots that appear on your display are an intrinsic characteristic of the TFT manufacturing technology. NOTE Over a period of time, and depending on the usage of the computer, the brightness of the LCD Screen will deteriorate.
If Something Goes Wrong Resolving a hardware conflict To run Error-checking: 1 Click Start, then click My Computer. 2 Right-click the drive you want to check and select Properties from the menu. The drive’s properties box appears. 3 Click the Tools tab. 4 Click the Check now button. The Check Disk All Apps box appears. 5 6 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start. Error-checking runs the test.
If Something Goes Wrong Resolving a hardware conflict 271 hardware configuration meets its needs. Check with the manufacturer of the software for further troubleshooting tips. A diskette will not go into the external diskette drive. You may already have a diskette in the drive. Make sure the drive is empty. You may be inserting the diskette incorrectly. Hold the diskette with the hub side facing down, and insert it so that the metal head window cover goes into the drive first.
If Something Goes Wrong Resolving a hardware conflict Examine the disc to see whether it is dirty. If necessary, wipe it with a clean damp cloth dipped in water or a neutral cleaner. Replace the disc in the tray. Make sure it is lying flat, label side uppermost. Press the disc down until it locks on the spindle. Close the drive tray carefully, making sure it has shut completely. You press the disc eject button, but the drive tray does not slide out.
If Something Goes Wrong Resolving a hardware conflict 273 in the Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. To access these settings, click Start, then Control Panel. Click on Sounds, Speech, and then Audio Devices. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards.
If Something Goes Wrong Resolving a hardware conflict manufacturer of the PC Card for information about using the card under the operating system. PC Card checklist ❖ Make sure the card is inserted properly into the slot. See “Inserting and removing PC Cards” on page 154 for information about how to insert PC Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control.
If Something Goes Wrong Resolving a hardware conflict 275 The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address. See “Fixing a problem with Device Manager” on page 262 for more information. Since all PC Cards share the same socket, each card is not required to have its own address.
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on, and ready (online). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to the computer and the printer.
If Something Goes Wrong Develop good computing habits 277 Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port.
If Something Goes Wrong Develop good computing habits On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to diskette, following the steps in “Saving your work” on page 94. ❖ Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape. Some people use a combination 5.375 x 8.375 ver 2.
If Something Goes Wrong If you need further assistance 279 If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help. Before you call Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first.
If Something Goes Wrong If you need further assistance Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s serial number.
If Something Goes Wrong Other Toshiba Internet Web sites 281 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA www.toshiba.ca Canada www.toshiba-Europe.com Europe www.toshiba.co.jp/index.htm Japan http://servicio.toshiba.com Mexico and all of Latin America Toshiba’s worldwide offices Australia Toshiba (Australia) Pty.
If Something Goes Wrong Toshiba’s worldwide offices Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 800-457-7777 (within the US) 949-859-4273 (outside of the US this call may incur long-distance charges) Spain Toshiba Information Systems (España) S.A.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 283 5.375 x 8.375 ver 2.
Hot Keys Instant password security Instant password security Fn + This hot key blanks the display. When the display re-appears, select your user name and enter the correct password if you have created one. Power usage profile Fn + This hot key displays the power usage pop-up window and cycles through the profiles. The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life.
Hot Keys Stand By mode 285 Stand By mode Fn + This hot key places the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby Mode” on page 114. 5.375 x 8.375 ver 2.
Hot Keys Hibernation mode Hibernation mode Fn + This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display. Sample Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond. 5.375 x 8.375 ver 2.
Hot Keys Display modes 287 Display modes Fn + This hot key cycles through the power-on display options.
Hot Keys Enabling a wireless device Enabling a wireless device Fn + This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi or Bluetooth™ only). The wireless modes are: Bluetooth™ enabled—This enables only the Bluetooth™ module. Wi-Fi enabled—This enables only the Wi-Fi module. All devices enabled—This enables both the Bluetooth™ module and the Wi-Fi modules. All devices disabled—This disables both the Bluetooth™ module and the Wi-Fi modules.
Hot Keys Disabling or enabling the TouchPad 289 Disabling or enabling the TouchPad Fn + This hot key enables/disables the TouchPad. To use the TouchPad, see “Disabling or enabling the TouchPad” on page 60. Sample disable and enable TouchPad windows Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + 5.375 x 8.375 ver 2.
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world.
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks. The ConfigFree utilities include the following: ❖ Connectivity Doctor—The Connectivity Doctor utility is used to analyze network connections and fix networking problems with your notebook computer.
Using ConfigFree™ with your Toshiba Computer Getting Started Getting Started This section contains information about the ConfigFree main screen, and how to start and setup ConfigFree. For more detailed information on setting up and using ConfigFree, see the Help File included in the application. Starting ConfigFree To start ConfigFree, be sure the computer has a wired or wireless connection.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 293 Exit Wireless LAN Bluetooth Connectivity Doctor Profiles Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key settings. Sample viewing device information 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 295 If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: 1 Click the icon in the system tray. 2 Click Search for Wireless Devices. A virtual map appears with a graphical representation of the wireless devices that have been detected.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 297 Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device. Sample viewing Bluetooth devices You can connect to devices shown on the Bluetooth map: 1 Click the icon of a Bluetooth device. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 2 Click your own computer at the center of the map. 3 Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device. Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree profiles are useful for easily switching network settings and devices.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 299 ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for the default printer. To create a profile: 1 Click the icon in the system tray. 2 Move the pointer to Profile. 3 Click Add. The Add Profile screen appears. 4 Select Capture and click OK. The Add Profile screen appears.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Add Profile screen NOTE The online help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported. This feature is useful when transferring profile settings to other computers.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 301 To connect to a Toshiba Wireless Projector: 1 Click the icon in the system tray. 2 Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and reestablished later.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Projector icon when connected with Quick Connect If the wireless mode for the wireless setting is set for 5 GHz (802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b) and then connects to the projector. The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed.
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch 303 Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home. The Auto Switch feature contains options for automatically switching between wired and wireless devices.
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile. To use the Semi-Automatic Switch feature: 1 Right-click the icon in the system tray. 2 Click Auto Switch.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS complementary metal-oxide semiconductor COM1 communications port 1 (serial port) COM2 communications port 2 (serial port) CPU central processing unit 305 5.375 x 8.
Glossary DC direct current DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission FIR fast infrared GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IE
Glossary RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web 307 Terms These terms may appear in this user’s guide.
Glossary application—A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information.
Glossary 309 byte—A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. C cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM.
Glossary controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See central processing unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Glossary 311 disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive—The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette—A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Glossary DVD-ROM (digital versatile [or video] disc read-only memory)—A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. E emulation—A technique in which a device or program imitates another device or program. enable—To turn on a computer option. See also disable. executable file—A computer program that is ready to run. Application programs and batch files are examples of executable files.
Glossary 313 format—(verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it. frontside bus—The primary pathway (bus) between the CPU and the computer’s main memory. Also called “system bus.” See also bus. function keys—The keys labeled F1 through F12, typically located on the keyboard.
Glossary hot swapping—The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. I icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device—See device.
Glossary 315 local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives. M megabyte (MB)—A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes.
Glossary non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer. Compare system disk. O online—Available through the computer.
Glossary 317 port—A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor—See central processing unit (CPU). program—A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties—The attributes of an object or device.
Glossary ROM (read-only memory)—Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM. S select—To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it.
Glossary U 319 universal serial bus (USB)—A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial. upload—To send a file to another computer through a modem or network. See also download. USB—See universal serial bus (USB).
Index Numerics B 101-key keyboard 87 backing up files 86 battery alarms 126 changing 129 charge does not last 266 charging 55 charging before use 49 conserving power 127 disposal 135 installing 129 not charging 265 power usage hot key 128 power usage mode 284 removing 130, 131 unlocking 130 battery power displaying remaining 124 monitoring 124 Bridge Media slot 157 button power 58 start 139 A AC adapter 52 AC power cable connectors 290 accessories carrying cases 83 Add Printer Wizard 70 adjusting record
Index C CD playing an audio 103 playing using Auto-Run 105 CD and DVDs viewing contents 106 CD/DVD creating 105 CDs inserting 102 problem solving 272 channels DMA 261 IRQ 261 character keys 87 charging the battery 55 checking device properties 263 click 60 communications network connection 144 system resources 261 compact discs inserting 101, 102 problem solving 272 removing 108 computer customizing 242 non-system disk or disk error message 257 not accessing disk drives 256 running on battery power 119 set
Index diskettes copying files to 97 display does not look normal/flickers 268 external monitor not working 268 latch 56 screen is blank 267 display device connecting 75 display mode setting 76 display modes hot key 287 display output settings 78 display panel closing 82 opening 56 disposal information 27 disposing of used batteries 135 DMA (Direct Memory Access) 261 double-click 60 DVD-ROM or multi-function drive cannot access disc 271 drive tray will not open 272 inserting discs 102 problems 271 remo
Index assigning a key 237 using drag-and-drop 238 function keys 88 G game box connection 166 H hardware conflicts 260 resolving 262 headphones using 153 Help Windows XP Media Center Edition 259 Hibernation mode 112 configuring 113 starting again from 114 Hibernation mode hot key 286 hot key display modes 287 functions 283 Hibernation mode 286 keyboard 289 keyboard overlays 289 power usage mode 284 Stand By mode 285 volume mute 283 wireless mode 288 hot key power usage mode 128 hot key utility 245 deskto
Index assign 239 changing 240 direct assign 239 popup 240 removing 240 key assignment viewing existing 240 key assignments changing or removing existing 240 keyboard character keys 87 function keys 88 hot keys 289 not working 256, 267 overlay keys 89 unexpected characters 266 Windows special keys 89 keyboard, external 68 keyboard, full-size 87 keyboard, PS/2-compatible 68 L removing 67 Memory Stick inserting 157 removing 158 microphone 152 built-in 152 Microsoft Support Online Web site 260 modem det
Index P password deleting a supervisor 252 disabling a user 253 supervisor set up 250 passwords instant, using 250 setting 249 PC Card checklist 274 CIS (Card Information Structure) 273 computer stops working 275 configuring 156 errors 275 hot swapping fails 275 inserting 155 modem default 142 not recognized 275 problem solving 273, 274, 275 removing 156 setting up 156 port COM 142 Ethernet LAN 145 S-video In, connecting to 80 posture 44 power alarms 126 computer will not start 256 problem solving 265 turn
Index display is blank 267 DVD-ROM or multi-function drive tray does not eject 272 external display not working 268 external keyboard not working 267 external monitor 267 faulty memory 264 hardware conflict 260, 261 high-pitched noise 272 illegal operation 255 Internet bookmarked site not found 259 Internet connection is slow 259 keyboard not responding 256 keyboard produces unexpected characters 266 missing files/trouble accessing a disk 269 modem not receiving or transmitting 277 no sound 272 non-sy
Index main battery 130 RGB (monitor) port connecting an external monitor or projector 78 RJ-11 jack 143 Run dialog box 93 running the computer on battery power 119 S safety computer 136 disposing of batteries 135 icons 39 precautions 46 saving your work 94 screen blank 267 does not look normal/flickers 268 scroll button 60 SD Card inserting 158 removing 159 seating 44 secondary button 60 security 242 selecting a place to work 42 setting up computer 63 setting up a connection 144 setting up your computer 4
Index turning on the power 57 TV antenna port 80 U Universal Resource Locator (URL) 140 user password, disabling 253 using a file extension 95 utilities Power Saver 243 V video cables 75 video display device connecting 75 volume mute hot key 283 W warranty limited warranty 41 Web sites 280 Support Online 260 Web sites,Toshiba 281 Wi-Fi wireless networking 144 Wi-Fi Mini PCI modules 146 Windows Explorer 92 Windows Media Player 103 Windows Start menu 91 Windows XP Media Center Edition Help 259 Help a
