Instruction Manual

1.Press Ctrl, Alt and Del simultaneously (once).
If you are using Windows NT, apreliminary dialog box appears. Click Task List toget tothe
Close Program dialog box.
2.In the Close Program dialog box, look for the words not responding beside aprogram's
name, select the program, then click End Task.
Closing the failed program should allow you tocontinue working. If it does not, continue
with step 3.
3.Close the remaining programs by clicking End Task.
4.Click Shut Down, select Restart, then click Yes.
Your computer shuts down and restarts Windows.
Avoid pressing Ctrl, Alt and Del simultaneously twice torestart the computer unless absolutely
necessary. Close all open programs before shutting down Windows tosave any data.
Your program has performed an illegal operation.
If you receive this message, record the details and consult the software manufacturer.
To record the details:
1.Click the Details button and select the text Windows displays.
2.Press Ctrl and C simultaneously tocopy the text tothe clipboard.
3.Open Notepad (click Start, point to Programs, then point to Accessories and click
Notepad).
4.Press Ctrl and V simultaneously topaste the details into Notepad.
5.Add aparagraph break and type some notes describing what you were doing when you
received the message.
6.Save the file and refer toit when you contact the software manufacturer.
You receive aNon- System Disk error message.
A diskette is in the drive while the computer is starting Windows. Remove the diskette and press
any key tocontinue.
Problems when you turn onthe computer
The computer does not start.
Make sure you attached the power cable properly and that the outlet you use is live.
Press and hold down the power button for afew seconds.
The computer starts but, when you press akey onthe keyboard or touch the mouse, nothing
happens.
You may have asoftware or resource conflict. Toclear the condition, press Ctrl, Alt and Del
simultaneously, or press the reset button.
Read the documentation that came with the conflicting device and "Resolving ahardware
conflict" in this manual.