Instruction Manual

AC power varies with the country; you may need toset the power switch onthe back of the system
unit. See "Setting the voltage switch".
Depending onthe computer's configuration and purpose, you may also need to:
q Connect the computer toalocal printer.
q Connect the computer toanetwork.
q Install devices in the expansion bays.
Connecting peripherals
The following sections explain how toconnect your peripherals.
Connecting amonitor
Refer toyour monitor documentation for detailed instructions onconnecting amonitor.
1.Plug the 15-pin D-sub connector onthe video signal cable into the video port onthe back of
the computer.
2.Firmly attach the cable by tightening the screws.
3.Connect the monitor's power cable tothe back of the monitor.
Connecting akeyboard
You will use the keyboard totype information and navigate around the monitor. You can use
aPS/2-compatible keyboard.
Attach the keyboard cable tothe keyboard port.
Make sure the computer is off before you attach the keyboard. Connecting aPS/2 keyboard with
the computer's power oncan damage the keyboard, the computer, or both.
Connecting amouse
You will use amouse toeasily navigate onthe screen and perform application tasks. You can use
aPS/2-compatible mouse or aserial mouse.
Make sure the computer is off before you attach the mouse. Connecting aPS/2 mouse with the
computer's power oncan damage the mouse, the computer, or both.
Connecting aPS/2 mouse